Part Number: INA198 Other Parts Discussed in Thread: INA193 , INA196 , INA197 , INA194 , INA195 , Hi,
Full-Scale Input Voltage is specified 0.15V(typ).
How condition is this?
Best Regards,
Kuramochi
Part Number: INA194A-Q1 Other Parts Discussed in Thread: INA194 hi there,
my customer wonders which maximum values for the Analog Inputs, Vin+ Vin- on INA194A-Q1 apply. the datasheet of INA194 lines out -18 to +18V ; in the datasheet of INA194A-Q1 this…
Hi Ivan,
Please refer to the thread: https://e2e.ti.com/support/motor-drivers/f/38/t/355575 . We have not performed any additional studies so the recommended upper limit is still 200kOhms.
The DRV8412 and DRV8432 have similar specifications.
Have you considered…
Dear Marx,
Thanks for choosing TI! Based on the description of your test, it sounds like you're running into issues with the lower Vsense condition on this device. The INA194-Q1 has special criteria that exists when Vsense < 20mV, found in section 7.4…
Part Number: DRV8874 Other Parts Discussed in Thread: , MSP-EXP430G2ET , INA194 , Good morning to all.
I would like develop one new application to a DC brushed motor using DRV8874 integrated current sensor IC. Main objective is to implement current loop…
Part Number: LM5176 Other Parts Discussed in Thread: INA194 Hi Team,
We want to use LM5176 to design for large watt load, condition is Vin 9~36V to 12V output 400w I saw a file sharing between two parallel four-switch with droop method for higher power…
Hello Peter and Michael,
Thanks for your replies.
I'm waiting on some ordered components to test your proposed solutions. I'll continue on both ideas. Either working with current sense amplifier (INA240, INA186 and INA190 ordered). And on the other hand…
Part Number: INA195 Other Parts Discussed in Thread: INA194 , INA193 I am using the INA195 to sense current through an inductive load on the low-side of the load. I have implemented a high-side and low-side switching scheme (essentially an H-bridge) to…
Part Number: INA196 Other Parts Discussed in Thread: TINA-TI , INA193 , INA198 , INA194 , INA195 , INA197 Hello,
I'm using INA196 to measure current flowing through the load as per attached picture. I have wide range of currents, so I use INA196 to measure…