• 

  Eray Ocak

  • 18 hours ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: LAUNCHXL-CC1350: EasyLink_init returns EasyLink_Status_Param_Error

  Thanks for response, I actually resolved issue by checking which parts of EasyLink_init fails and found out that I had to enable configurations by defining them in 'easylink_config.c'. I added #define SUPPORT_PHY_50KBPS2GFSK to 'easylink_config...
• 

  TER

  • 1 month ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: LAUNCHXL-CC1350: Encoded payload and termination bytes validation

  I'm not even able to understand what your actual problem is. If you send with Preamble || Sync word (it's constant) || 0x01, 0x02, 0x03, 0x04, 0x05 (payload is 5 bytes length) as you wrote, you have to use fixed packet length since you are not...
• 

  Ilya Pruzhinin

  • 2 months ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: LAUNCHXL-CC1350: CC13x0 destination address

  HI Siri, I've already found the solution - to use EasyLink_enableRxAddrFilter(newDevAddrFilterTable, 1, 1) Thank you Ilya
• 

  TER

  • 1 month ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: LAUNCHXL-CC1350: Extra bits in transmit packets

  What do you mean by "custom RF frontend"? Preamble is typically a TX parameter. Meaning that CC13xx can be used to communicate with a different receiver that accept a shorter preamble. Hence the possibility to set short preamble are needed...
• 

  RGW

  • 3 months ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: LAUNCHXL-CC1350: XMSSJE3G0PA-003 and BLM18HE152SN1D

  Hi, The EMI suppression component is not crucial and this can always be changed to another part. The switch is more crucial and would recommend to keep with the Murata part. The switch is also distributed by Arrow: https://www.arrow.com/en/products...
• 

  Devin Kelly

  • 3 months ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: CCS/LAUNCHXL-CC1350: Peripheral Configuration

  Ahh OK. Only now that you've spelled everything out in painstaking detail I get it. Devin
• 

  FI

  • 2 months ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: CCS/LAUNCHXL-CC1350: FEC at High Rates

  Hi, Were you able to test this mode? The symbol rates supported are already available in SmartRF studio. Thanks
• 

  Thierry Grandpierre

  • 4 months ago
  • Bluetooth®
  • Bluetooth® forum

  RE: CCS/LAUNCHXL-CC1350: UART Display issue from BLE Simple_peripheral demo application

  Many, many thanks Chen, this works perfectly. Have a nice day ! Best Regards, Thierry
• 

  shiva p

  • 6 days ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  LAUNCHXL-CC1350: CC1350 TI 15.4-Stack

  Part Number: LAUNCHXL-CC1350 Hello sir, i am using CC1350 launchpad and simplelink sdk with ti154stack (collector and sensor) examples. In this example collector device is starting the network by using the keypress(BUTTON1) and sensor device is joining...
• 

  Alexis Crandall20

  • 6 months ago
  • Sub-1 GHz
  • Sub-1 GHz forum

  RE: LAUNCHXL-CC1350: Error connecting to the target: (Error -275 @ 0x0)

  Hi Ahmed, Have you validated that you hooked the devices up in the right order? It looks like the ccxml outlines the order that they should be. It might also be worth checking out this document for JTAG debugging: http://software-dl.ti.com/ccs/esd...

Didn't find what you are looking for? Post a new question.

• Ask a new question