Part Number: LM3243 Hi Team
As described in the datasheet, the ACB characteristic will provide additional output current at the rising and falling edges of the output.
But this output path is not stabilized by inductance, so this additional jump current…
Part Number: LM3243 hi,
I’m the FAE. my customer wants to use your product line’s LM3243.
As we know LM3243’s output voltage is set by VCON pin, in a typical application, this pin is connected to a DAC’s output.
So the question is, whether they…
Part Number: LM3243 Hi Dear expert,
My customer wants to know in heavy load, light load, PWM and PFM mode and spread spectrum mode, what is the SW frequency changing range?
Can you please help on it?
thanks very much!
Joyce
Other Parts Discussed in Thread: LM3243 In LM3243 datasheet, 1.5uH inductor is recommended. Is it OK to use 1uH instead? If not, is there any issue using 1uH?
Other Parts Discussed in Thread: LM3243 , LM3263 , LM3242 Hello,
Could you please kindly let me know below information ?
1.Are Current limit function and Thermal Protection function same function in LM3243 and LM3263 ?
2.Does enable current…
Part Number: DAC53202 Other Parts Discussed in Thread: LM3243
Hello,
I'm currently using a DAC53202 and controlling it with SPI.
I want to control Buck's output voltage slew rate by connecting the output of DAC53202's OUT1 to LM3243's VCON.
I…
Part Number: DAC63204 Other Parts Discussed in Thread: LM3243 , Hi,
I'd like to implement the circuitry for controlling and adjusting the ramp-up time from 0V to target voltage.
I'm going to use DAC63204 and LM3243(Buck Converter).
Would please…
Hi,
I've attached the 2013 User's Guide for power products. Starting on page 53 you will find a selection of PWM controllers. many of these teh frequency can be varied according to external criteria.
As an example if you use a UC3842 it is a simple…
Gary,
Most any of our power controllers with dual output capability will provide the control. See attached document starting at page 50 with the dual output controllers on page 53 and 54 and choose what features you want.
Regards,
John
