Part Number: LM5160
Hi,
Do you have a lineup of flyback ICs with integrated MOSFETs?
The output power is assumed to be around 30W. The LM5160 seems to be the case, but if there is a recommended lineup, I would like to hear about it.
Thanks,
Part Number: LM5160-Q1 Other Parts Discussed in Thread: LM5160 Hi,
The customer applied Transformer RC filters with EMC improvements.
Please review of problems and considerations regarding the application of RC filters.
1) Transformer output side wobbles…
Hi Karthik
The voltage drop probably only appears when all of the LDO's start to load the IC. There's 0 current at t=0, so that's why the voltage appears fine at first.
Do you have any flexibility on where the 5V power is located? Is something…
Part Number: LM5160 Hey Buck Regulator team,
I have a customer working on a power tree for a new design and we were hoping your team could provide some guidance. Please see a summary of the input/output requirements below in addition to some questions…
Part Number: LM5160
Hi, (exacte part reference is LM5160DNTJ)
i used Webench design to generate this shematic https://webench.ti.com/appinfo/webench/scripts/SDP.cgi?ID=946C4C28798B699C .
I tried using the same component suggested by Webench and i got noisy…
Part Number: LM5160-Q1 Other Parts Discussed in Thread: LM5160 Hello
i have designed a DC-DC converter and just want to make sure that i have calculated all values right, attached is the schematic for your reference...
input : 19-65V
output: 15V - 2A
…
Part Number: LM5160-Q1 Other Parts Discussed in Thread: LM5180-Q1 , , LM5180 , LM5160 Hello TI expert,
Does LM5160-Q1 / LM5180-Q1's output voltage can directly supply for load ? (because of transformer)
or we need add one additional voltage regulator…
Part Number: LM5160-Q1 Other Parts Discussed in Thread: TIDA-01418 HI,
In reference design of TIDA-01418, about the LM5160QPWPRQ1, I have some question about it:
1. Why it use negative voltage -10.51V to generator 16.8V and 6.27V, but not used positive…
Part Number: LM5160-Q1 Other Parts Discussed in Thread: LM5160 , LMR36520 I want to design flybuck converter with LM5160.
In the application note "Designing an Isolated Buck (Fly-BuckTM) Converter using the LMR36520",there have a suggestion of duty cycle…