Part Number: LM53603-Q1 Hello,
I'd like to accurately estimate the Max dropout voltage of LM53603-Q1 under the following conditions.
Output voltage drops down to 4.95 V.
Output current: 3 A
Switching frequency: It is acceptable that f SW goes…
Other Parts Discussed in Thread: LM53603-Q1 , TPS54060 , LM53603 , LM536035EVM Can someone make an educated assumption about tr an tf of LM53603-Q1? Their values affect IC Power dissipation. For example in Application report SLVA317B the author made an…
Other Parts Discussed in Thread: LM53603-Q1 , LM53603 Dear support team
My customer evaluate LM53603-Q1 using EVM.
In frequency response data, Gain prot starts from 0dB at Vout=3.3V Iout>1A (see attached file.)
Is this normal operation?
Could…
Other Parts Discussed in Thread: TINA-TI Hello,
I'd like to perform simulation of LM536035-Q1 in FPWM mode on the Webench, but it seems that only AUTO mode is available currently. How can I perform the simulation in FPWM mode?
Best regards, Shinichi…
Hi All,
The data sheets are listed as follows.
(4) The maximum recommended output voltage is 6 V. An extended output voltage range to 10 V is possible with changes to the typical
application schematic. Also, some system specifications will not…
Part Number: LM53603 Other Parts Discussed in Thread: LMR33630 , , LMR51430 To whom it may concern, my company uses TI part LM53603AMPWPR (or WPT suffix) to generate a 5 V supply for a load of up to 2.6 A and another almost identical circuit on the same…
Hi, Thank you for your support. They would like to know one more thing.
The sentence which "High junction temperatures degrade operating lifetimes. Operating lifetime is de-rated for junction temperatures greater than 125°C." exists on the datasheet…
Ryuji,
1) The LM75610 is compatible with ISO7637-2, 2011.
2) Pulses 4, 5a, 5b have been moved out of ISO7637-2 (2004) and are now in ISO 16750-2 and ISO21848 per the note on pg 16 of ISO7637-2 (2011). I looked over several TIDA ref designs and could…
Other Parts Discussed in Thread: LM53603 Hi,
Mycustomer has three questions about [9.2.2.6 BIAS] of LM53603 datasheet. =======================================================
Q1. Is it possible to Vout is BIAScurrent any 3.3V or 5V is below 100mA…
Part Number: LM43602-Q1 Other Parts Discussed in Thread: LM53602-Q1 , LM43602 , LM53603
Hello,
I'd like to ask some questions about LM43602-Q1.
At the input voltage of 6 to 6.5 V that will not rise further, will a LM43602-Q1 switch its switching…
