Part Number: LMH6321 I am not sure of how the pad should be connected with this part. Is it supposed to be connected to GND or to the lowest voltage present? I am assuming that my customer should use vias for this connection?
Can you also show me where…
Hi Loren,
I just show the LMH6321 evm schematic and it shows it works in noninverting mode and gain can be set by setting RF, RG and RT. I was trying to simulate lmh6321 with a gain of 2 but gain is still one. schematic is attached. Reference schematic…
Other Parts Discussed in Thread: LMH6321 , THS4031 My customer has seen the following issues using the LMH6321.
I am evaluating the LMH6321 buffer using the LMH6321 evaluation board. I am using the buffer in a loop with a THS4031 op amp. I have a 10K…
Other Parts Discussed in Thread: LMH6321 I've got an LMH6321 design which worked fine in the previous version but is now failing in an odd way. I'm attaching a schematic sketch which shows the two versions, working and not working. The symptoms are that…
Other Parts Discussed in Thread: BUF634 , LMH6321 Hello,
I would like to drive to large capacitance about 10uF.
I want to use BUF634 or LMH6321 for drive 10uF.
Can I use these device for 10uF capacitive load?
And If there is other reccomend…
Part Number: OPA547 Other Parts Discussed in Thread: LMH6321 Tool/software: Hello,
Could you provide/confirm the thermal resistance values for OPA547FKTWT.
1) Theta Jb (Bottom) (I believe this is 3 per the datasheet)
2)Theta Jc (Top)
Part Number: OPA593 Other Parts Discussed in Thread: LMH6321 , Hello,
I see from comments in the forum that the adjustable current limiting feature in opamps such as OPA593 and LMH6321 is not modeled in the TI-provided SPICE files.
It is possible…
Part Number: SN54F241 Other Parts Discussed in Thread: DAC081C081 , BUF634A , TMUX1219 , LMH6321 , TLV9151 Tool/software: Hello,
We are looking for a component that can increase the driving capacity of digital I/O from an FPGA.
Additionally, we need…
Other Parts Discussed in Thread: LMH6321 , LM334 , REG1117 Dear All,
I am a university PhD student interested in designing a voltage buffer with adjustable current output compliance value.
The buffer should arrogate enough current to the load until…
