Part Number: LMH6321 Other Parts Discussed in Thread: TLV1702 Tool/software: Hi team,
The customer has a broken issue here. Could you review the schematic and then give some suggestions here?
customer designed an LCR meter to use the below circuit…
Part Number: LMH6321 Tool/software: Hello.
I am trying to implement LMH6321 to drive a 50Ω load using a single supply voltage of 5V. I see two issues and would like to seek your opinion on the issues. I am using the Op-Amp as suggested in the datasheet…
Part Number: LMH6321 The LMH6321 buffer has a confusing, at least to me, simplified schematic.
(1) For starters, a circuit symbol consisting of 2circles just touching are used. what is this circuit element? (a current source is typically overlapping…
Part Number: LMH6321 Other Parts Discussed in Thread: DAC7716 , THS3091 Tool/software: Dear All, I am Designing a Buffer Circuit using LMH6321MRX/NOPB IC to Amplify the DAC Output Current. The Load requires atleast 150mA Output current for which I was…
Part Number: LMH6321 Other Parts Discussed in Thread: BUF634 , , TINA-TI , OPA593 , OPA593EVM Hi,
does TI offer a full simulation model of the LMH6321 chip? The downloadable SPICE files from TI explicitly state "* MODEL DOES NOT HAVE PROGRAMMABLE CURRENT…
Part Number: LMH6321 Tool/software: I plan to use the LMH6321 to drive the erase head plus coaxial cables in a tape recorder. Fixed Frequency 153.6 kHz. I had planned to use +/- 17V rails. The TI product page lists the max voltage as 30V, but the datasheet…
Part Number: LMH6321 Other Parts Discussed in Thread: OPA192 Tool/software: Hello! I am using the LMH6321 in the following design: I input a 0 - 2.5V signal from the left and at the output I get a -0.2 - 10.2V signal. Using the 53.6kΩ resistor I am setting…
Part Number: LMH6321 Tool/software: Hi,
I have a question regarding the connection of the exposure pad in the SO-8 package.
In the datasheet it is mentioned to connect it to V-, in my case to -5V.
I made a quick test with the amplifier, connecting…
