Part Number: LP3878-ADJ Other Parts Discussed in Thread: TPS746 , TLV759P , TLV767 , TLV758P , TPS745 Hi,
My cusotmer is using LP3878ADJ for their 3.3V input and 2.5V output rail and 500mA out max load current. The dropout voltage is 800mV max but there is…
Part Number: LP3878-ADJ Other Parts Discussed in Thread: LP3878 , LP3879 , Hello,
LP3878 (adjustable version) and LP3879 (fixed versions) seem to be very similar devices.
However, the LP3878 shows VIN up to 16V (understand Working voltage), while LP3879…
Part Number: LP3878-ADJ Other Parts Discussed in Thread: LP3878 , Hi team,
We want to check the soft start time of the device LP3878, because we cannot find the spec on the datasheet. Thanks.
B R
Frank
Part Number: LP3878-ADJ Other Parts Discussed in Thread: TPS7A47
Hello
One of my clients is using the LP3878-ADJ for this project.
It seems to me that it was applied with the right design values.
Could you please take one more review?
< deleted schematics…
Part Number: LP3878-ADJ Team,
-Could you please confirm that the SHUTDOWN\ pin is specified for the same condition as Vin? -The EVM is showing a 51k resistor between Vin and SHUTDOWN\. What is the reason to use a resistor? On the Webench generated schematics…
Part Number: LP3878-ADJ Other Parts Discussed in Thread: TINA-TI , Tool/software: TINA-TI or Spice Models Hello,
I am using the unencrypted model: LP3878-ADJ_TRANS.lib.
I receive an error on line 100 "X_X1 ROUT 0 N16780111 N431149 VYY ZX ".
There…
Part Number: LP3878-ADJ On the surface, my question seems simple. But I assure you that it isn't! :)
On the first page of the datasheet it says, "Output Voltage Range: 1 V to 5.5 V". But in 8.1 it says, "The LP3878-ADJ can provide 800-mA…
Part Number: LP3878-ADJ Hi, team.
I have something I want to check about LP3878ADJ, and I posted this question.
In order to realize the recommended pattern of LP3878ADJ described in the data sheet, 7 pin as NC pin is connected to GND.
Since this pin is…