Part Number: LP87524-Q1 Have been trying to create a DTS file for a LP87524 on i2c bus 1 address 0x60, I have what appears to be a overlay that compiles and runs however my initial values are not being set on load.
I've used https://elixir.bootlin.com…
Part Number: LP87524-Q1 Hello,
I am now trying to use a LP87524 q1 DC DC converter to convert a voltage from 5V into 3.3V, 2.7V, 1.8V and 1.2V. And because 4 different output voltages are needed, I will choose the configuration of four 1-phase outputs…
Part Number: LP87524-Q1 Hi team,
Can I measure phase margin and draw a bode plot of LP8752x-Q1 by inserting series resistor in between OUT and FB_Bx pin?
regards,
Part Number: LP87524-Q1 Other Parts Discussed in Thread: LP8752-Q1 , LP87521-Q1 , LP87522-Q1 , LP87523-Q1 , LP87525-Q1 Hi Expert,
Our customer has a new request for LP87524-Q1. They would like to output 0.8V and all four CH output together. Do we have…
Part Number: LP87524-Q1 Hi Expert,
I don't really understand what's the current limit for each channel. I don't see clear description about this. what does it mean by "The maximum output current from....phase configuration"? The total current is less…
Part Number: LP87524-Q1 Hi team,
My customer is planning to design LP87524-Q1 but they would like to know the difference between all LP8752x series devices.
And could you also advise the LP87524's default value setting?
And does customer need to…
Part Number: LP87524-Q1 Hi team,
if configure the LP875230-Q1 to 2+1+1 mode, what's the current limit in each phase?
the total current limit of LP875230-Q1 is 10A, right? how about the each phase? How to distribute the current of each phase？
thank…
Part Number: LP87524-Q1 Hi Team,
I noticed that the LP87524 register map doesn't include anything for slew rate control, which appears to be default set by the OTP to be 3.8mV/us. Is this an OTP-only register, or is there another address that we can…
