Part Number: MSP-ISO Other Parts Discussed in Thread: MSP-EXP430F5529LP , EVM430-F6779 , I am connecting the MSP-EXP430F5529LP (launch pad) to MSP-ISO for communication with the EVM430-F6779 Poly-Phase-E-Meter evaluation module. after following the below…
Part Number: EVM430-F6779 Other Parts Discussed in Thread: MSP-ISO , MSP-FET Hello,
So I have this MSP-ISO board and EVM430F67791 energy measurement board with me. Normally we connect the MSP-FET JTAG pins with the evm board directly but how to program…
Part Number: EVM430-F6736 Other Parts Discussed in Thread: MSP-ISO , MSP-EXP430F5529LP Hello,
So I have this EVM430-F6736 for single phase energy measurement and I wanted to link my board with Energy Measurement Design Centre using the given method.
I…
Hey Kerk,
Good to hear that you got it working!
I received my EVM430-I2040S on Friday but didn't have a chance to test with it until last night. I'm seeing exactly what you are. I'm unable to program the board through MSP-ISO currently and see…
Part Number: EVM430-F6779 Other Parts Discussed in Thread: MSP-EXP430F5529LP , MSP-ISO , MSP-FET I Connected Source and load to the EVM430-F6779 but not able to see the display ON(Device Didn't Boot up). Could you help us how to power up this device and…
Part Number: MSP-ISO Other Parts Discussed in Thread: MSP-EXP430G2ET , , EVM430-F67641 , MSP430G2553 , ENERGIA
Hi.
I am using MSP-ISO isolation board with MSP-EXP430G2ET Launchpad to connect it to EVM430-F67641 through RS-232. Question: can isolation board…
Part Number: MSP430FR2355 Other Parts Discussed in Thread: MSP-EXP430FR2355 , MSP430I2041 , UNIFLASH , ISO1642 , MSP-ISO Hi,
My customer is using MSP-EXP430FR2355 as a downloader for image writing.
The customer has added isolators to the EVM JTAG signal line…
Part Number: MSP-EXP430F5529LP Other Parts Discussed in Thread: DRV8323 Hello... I'm using an MSP-EXP430F5529LP MCU connected to a TI Motor Driver EVM (DRV83x3Rs), to spin a BLDC Motor.
For almost a year, the MCU, EVM and system worked flawlessly, while…
Part Number: MSP-CAPT-FR2633
FYI
the"CAPTIVATE-ISO Rev C" PCB from the MSP-CAPT-FR2633 Dev Kit has an Silkscreen error on the Target side.
RST/TST signals markings are flipped.
also found the error in the CAPTIVATE-ISO_REV_B_PCB_layers.PDF…