Part Number: MSP430G2152 Hello,
I am going into production using the above mentioned MSP430 uC (TSSOP-14 package). My experience with manufacturing, there is always a small amount of fall out that will need to be re-worked. To enable the ability of re…
Part Number: MSP430G2152 I have just completed a prototype design using the MSP430G2152 in the PW package (TSSOP-14). The application is generating two PWM signals using TimerA0 on TA0.1 and TA0.2. On the PW package I chose to route these signals to pins…
Other Parts Discussed in Thread: MSP430G2152 I have a simple circuit where an MSP430G2152 is used to control a transistor. The intent is to briefly cut the power to a device once per day (the reason is a long story so I won't get into it). I'm trying to…
Other Parts Discussed in Thread: MSP430G2152 Hi,
I am using the watchdog in MSP430G2152 chip.
After reading the MSP430x2xx user guide, I am confused with the default clock source of the watchdog.
According to datasheet, when bootup after reset, LFXT1Sx…
All,
I am trying to track down the cause of some odd behavior that I have observed on said processor's timer outputs. All of the tests were done with Timer A running at 1MHz straight from SMCLK. The goal is to generate a 1us pulse every 25us. If I…
Other Parts Discussed in Thread: MSP430G2152 I tried to program with my ez430 USB stick a MSP430G2152 controller.
It doesn't work. I had no problem to prgramm F2002 or F2112 devices in the same environment. I did lot of products in the past with MSP430F…
Other Parts Discussed in Thread: MSP430G2152 Hi to every one......
I'm trying to capture the incoming frequency from the inbuilt comparator output.If capture input signal is within the given band means, some outputs will be enable.
If not in the band…
Other Parts Discussed in Thread: MSP430G2152 Hi Guys;
I am using msp430g2152 for my project application in that i want to capture 840khz frequency signal..... by using 16mhz oscillator signal... i cant able to capture my signal so help me..
ADVANCE…
Other Parts Discussed in Thread: MSP430G2452 , MSP430G2152 i have a launchpad using the msp430g2452. i can program this board through ccs using a usb cable. this uses the emulation section of the launchpad board to program the msp430g2452 on the msp-exp430g2…