Hi Parry,
parryh said: I have found a workaround for now where I place the auto-generated Watchdog code from ti_drivers_config.c/h in my own Watchdog Class with the corrected header. This leaves the syscfg settings as they are (without a Watchdog in there…
parryh said: This is what I am observing with the problem section activated/deactivated:
With Problem Section (checking reset vector and stack pointer):
Valid CRC -> Boot into application
Invalid CRC -> Does not boot into application, but NO BOOTP…
Charles-san,
Thank you for your support. Yes, Stuart-san support to the same customer. Sure, I will ask you again if I have any update or the customer ask me, I will post again. Best Regards, Akihisa Tamazaki
Hi Ki,
Thanks for supporting,
Ki said: This function is defined in the msp432e411y.gel file. Is the customer using this gel file with their target configuration?
Might be Yes,
My customer set to using debug probe to XDS560v2 in target configration.
Ki…
Part Number: MSP432E411Y Other Parts Discussed in Thread: UNIFLASH , Hi
My customer is trying unlock MSP432E4's JATG for change MAC address.
Now, trying this sequence using XDS560v2, but doesnot works.
https://e2e.ti.com/support/microcontrollers/arm…
Part Number: MSP432E411Y Other Parts Discussed in Thread: UNIFLASH Hi
May I have question about MSP432E411Y USER_REG0 register?
In TRM, We could change 1 to 0 the USER_REG0 to USER_REG3 Registers.
And there is only way to reset this register is 3.3.4.3…
Part Number: MSP432E411Y Other Parts Discussed in Thread: UNIFLASH I have installed UniFlash 8.5.0 on Ubuntu 20.04 LTS, and while it launches and runs, if I try to program a part, as soon as I click on "Load Image",
a red error bar appears at…
Part Number: MSP432E411Y-BGAEVM I am looking for the complete design files for this eval board.
I would like the BOM, PCB fabrication drawing and gerber fiels.
I have not been able to locate these on the site.
Could someone please help me with this…
Part Number: MSP432E411Y Other Parts Discussed in Thread: MSP432E401Y
Hi,
We are considering migrating the TcpEcho sample code provided based on MSP432E401Y to MSP432E411Y.
Due to the different packaging, we believe some software changes will be required…