Part Number: OPA350 Other Parts Discussed in Thread: TINA-TI , , THS4551 Hi,
this thread is related to already closed thread https://e2e.ti.com/support/amplifiers/f/14/p/835567/3116784?tisearch=e2e-sitesearch&keymatch=opa350#3116784 . I have noticed some…
Part Number: OPA350 Other Parts Discussed in Thread: OP27 , OPA827 , OPA627 Hi Team,
Customer is asking if this device has any warm up time requirement so can meet our accuracy/drift spec? Thanks!
Andrew
Part Number: DDC232 Other Parts Discussed in Thread: OPA350 , OPA328 Hello,
TI recommends to use an op-amp to buffer the reference voltage for the DDC232.
The OPA350 is suggested, are there better buffer amplifiers that you recommend that are newer devices…
Hi Uttam,
We have many op amps that will meet the customer's need, if this is the cost issues.
Raymond Zhang1 said: Without capacitive load at the output of OPA350, non of these 100mΩ and 22uF are required, and OPA350 has plenty phase margin at 67…
Part Number: DDC264 Other Parts Discussed in Thread: OPA350 , Good days,TI expert.
I porbably found a reason why I would recevie all zeros in test mode(figure1).
Figure1
My partner who designed circuit missed the part of OPA350,he just…
Part Number: OPA350 Other Parts Discussed in Thread: THS4631
So this input capacitance issue is coming in from a number of directions lately - let me attempt a survey of where there might be some confusion,
1. So those of us (like Bruce Trump and myself…
Part Number: TMS320F28P650DK Other Parts Discussed in Thread: REF5030 , OPA350
Dear champs,
I am asking this for our customer.
It seems there are inconsistencies in the datasheet and in TI F28P65x control card/Launchpad schematic.
Questions:
1. What are…
Hello Braeden,
Welcome to the TI E2E community.
1. Yes, in order to optimize the usable 16b of dynamic range of the ADS1174, using a 1.6V reference will be a better option. You can also use a 2.5V reference and a simple voltage divider between the reference…
Part Number: OPA350 Other Parts Discussed in Thread: REF5025 , , ADS8354 , ADS8363 , OPA2350 , ADS127L01 Hello, I was reading an article on filtering noise from voltage reference into an ADC in "Tips and tricks for designing with voltage references" (…
I just downloaded the OPA350 macro-model and configured it in a buffer with single and dual supplies and they both show the input offset voltage of 127uV - see below.
OPA350 offset.TSC