Hello Mythili,
With MUTE you should be able to mask the pop, but please refer to the following post regarding pop noise for this device.
https://e2e.ti.com/support/audio-group/audio/f/audio-forum/956405/pcm1754-q1-pop-noise-issue
Regards,
A…
Part Number: PCM1754 Other Parts Discussed in Thread: PCM1755 Hi team,
In the thread below, it is mentioned that ZEROA is not open-drain in PCM1754.
https://e2e.ti.com/support/audio-group/audio/f/audio-forum/871284/pcm1754-q1-zeroa-pin
Is the…
Hello Ryo,
After reading your post again, I am wondering if you are asking about a pop noise or you are asking about the output level after halting the clock.
If you are asking about the DC level of the output, I think it is the similar issue to the…
Part Number: PCM1753-Q1 Other Parts Discussed in Thread: DS90UB949-Q1 , PCM1753 , PCM1754
Hi,
We are configuring DAC using spi master device. Spi configurations are as below:
1. spi mode0 is used(CPOL=0, CPOH = 0)
2. spi speed 1Mbps
3. Data…
Texas Instruments wide portfolio of Audio features Audio Converters , Audio Amplifiers and other Audio interface devices that are potential crosses for Discontinued, NRND or EOL Cirrus Logic Devices listed by Cirrus Logic here .
TI potential crosses…
Dear Derek,
Based on your input , my calculations for TPA3112 is 15.95W @1% THD, 13.5V.
Attached worksheet for reference. Please let me know if any thing is missing to include ? TPA3112.xlsx
Regards,
Habalappa
Part Number: PCM1753 Other Parts Discussed in Thread: , PCM1754 Hi,
According to PCM1753 data sheet, it seems that PCM1753 can be worked with the default settings normally even if the internal registers aren't access using the ML, MC and MD pins, but…
