Hello,
Finally after waiting for year, I have got a Brand New Smart AMP Learning Board PP-SALB-EVM, AIP001D, REV D, with XMOS chip on the board.
Connected to Windows 10 with the microUSB, both 3.3V LED and Blue LED turns on. And the Windows drivers installation…
Hi Mark,
I also found some unexpected distortion in the attached .cfg file, but when I configured the amplifier with PPC3 GUI it was all working as expected. What did you change in the PPC3 GUI?
Can you recreate the desired settings in PPC3 and create…
Part Number: PP-SALB2-EVM Other Parts Discussed in Thread: TAS2555 , Hello,
The following speaker characterization board, listed here: http://www.ti.com/tool/pp-salb2-evm , does not fit my budget too well, with a cost of $999.
Is there an alternative to…
Part Number: PP-SALB2-EVM Other Parts Discussed in Thread: TAS2557EVM , I just purchased a PP-SALB2-EVM learning board to go with a TAS2557EVM evaluation board. I need to characterize a speaker for my product and the PP-SALB2-EVM didn't come with everything…
Part Number: TAS2557EVM Other Parts Discussed in Thread: TAS2557 Hi
1. According to Taiwan FAE recommendations (Speaker: Ø28x7.5mm; 3W; 4ohm)
a. Set the delta temperature from 65deg => 85 and 105 deg b. Close the feed forward c. The frequency response…
Part Number: TAS2563YBGEVM-DC Other Parts Discussed in Thread: PPC3-EVM-MB , PP-SALB2-EVM , , TAS2563 Hi,
I am using TAS2563YBGEVM-DC together with PPC3-EVM-MB & PP-SALB2-EVM according to https://www.ti.com/lit/an/slaa952/slaa952.pdf?ts=1679312072239 . Connecting…
Part Number: TAS2X63EVM Other Parts Discussed in Thread: PP-SALB2-EVM , Hi, Is PP-SALB2-EVM board compatible with TAS2X63 EVM board? Just wanted to confirm before proceeding with ordering. Please find the link for reference: https://www.ti.com/tool/PP-SALB2…
Part Number: PP-SALB-EVM Hi Sirs, I applied a new PP-SALB-EVM but got hardware check failure. Would you please advise how to solve it on Windows 10? I tried to uninstall and reinstall the USB-AudioEVM but it was in vein (it worked with my previous EVM…
Hello Arthur,
Bingo! Thank you for your bright insight. Now our SALB2 is worked stable at 1.8V IOVdd setting.
I hope to see reference Jumper setting on TAS2563 SALB2 EVM manual document.
Our customer plan to use TAS2563 SA for portable audio EE with…