Part Number: AM3356 Other Parts Discussed in Thread: AM3354 We are using the AM3356 processor which performs TCP/UDP communication over the eth0 and eth1 ports.
We are using the CPSW to handle the 2 ethernet ports.
Our implementation on the CPU is an…
Hi Prajith
I did some testing with the PLC and notice the following:
With the addition of this code:
/* RXCFG and TXCFG configuration */
HWREG ( hwAttrs -> prussMiiRtCfgRegBase + CSL_ICSSMIIRT_RXCFG0 ) |= ( 1 << CSL_ICSSMIIRT_RXCFG0_RX_MUX_SEL_SHIF…
Part Number: PRU-ICSS-INDUSTRIAL-SW Dear support team,
We use on our custom board PRU-ICSS-HSR-PRP-DAN_01.00.02.00 packet software. We found out that when we use PRP network setup, we get a lot of CPU load from time to time. This issue occurs more likely…
Part Number: AM3356 Hi TI support
I am investigating if it is possible to use the PRU in switch mode with the Linux SDK for AM335X. In the Processor SDK Linux for AM335X 09_01_00_001 documentation I found the following statement:
( https://software-dl.ti…
Part Number: TMDSICE3359
Hello there,
I have installed the processor sdk already, now I want to work with PRU-ICSS-ETHERNETIP-ADAPTER and for that was thinking to getting started with the ethernet/ip adapter user guide but looks like the link is broken…
Part Number: TMDS64EVM Hello,
I have been trying to find the PRU-ICSS EtherCAT firmware stack for AM64x(TMDS64EVM) and as per this page - https://software-dl.ti.com/mcu-plus-sdk/esd/AM64X/08_00_00_21/exports/docs/api_guide_am64x/ETHERCAT_SLAVE.html the…
Hi Aravindh,
Aravindh Vishnu said: Do you know approximately when the next official version of the Ethernet/IP example application will be ready for release?
I will get back to you on Release date with-in a week.
Aravindh Vishnu said: Also, can you confirm…
Hi Sumit,
Thanks for update.
It means you are working on Linux (not TI-RTOS).
I am assuming, you are following below documentation:
https://software-dl.ti.com/processor-industrial-sw/esd/PRU-ICSS-ETHERNETIP-ADAPTER/latest/index_FDS.html
https://software…
Part Number: PRU-ICSS-INDUSTRIAL-SW Hi,
can somone explain me this code
#ifdef ADC_SDDF
void Read_ADC_Samples(void)
{
unsigned long u;
float v;
u = sd_get_cur_sample(sd, 3); /* SD7 */
v = ((float)u - 1048576.0) / 1048576.0;…