Part Number: PTH12040W Other Parts Discussed in Thread: PTH08T250W Dear,
In my application，I need 80A output current. When I check PTH12040W datasheet P19, I found it can parallel connection. So I want to confirm if it can parallel connection with two…
Part Number: PTH12040W
Hi
I'd like know internal (on the module) feedback resistors for PTH12040W.
Please share me the information. Thanks a lot.
BR
Sam
Part Number: PTH12040W Other Parts Discussed in Thread: PTH08T250W Hi,
I had a requirement of maximum output power/current of 3.3V@60A and a typical requirement of 3.3V@50A. I am planned to use PTH12040W power module for the application.
Input Voltage…
Hi H.W. Park,
Yes, usually if there is a pre-bias on the output from external circuit, the regulator will back off and not switch until the pre-bias voltage is lower than the programmed output voltage. In the scope shot it looks like VOUT is pulled…
Victor :
PTH012040W is not recommended for this control current application nor can we indorse this application. PTH12040W buck regulator absolute minimum output voltage is 0.8V.
Tom
Other Parts Discussed in Thread: PTH12040W Hi
We are using PTH12040W for our application. Input voltage is 12V DC and Output Voltage is 5V with 40Amps Load. We assumed Power dissipation 10w with reference to efficiency vs load current. We are need to…
Hi All,
Due to space problem we have placed the subjected device on bottom of the PCB, while soldering(Re-flow Oven) the device drops and need to hand solder.
Can anyone suggest the solution? We don't want to used through hole device due to complexity…
Other Parts Discussed in Thread: PTH12040W Shall I use PTH12040W after bridge rectifier with filter block, this output is is recommended for I/P of PTH12040W.
