Part Number: REF5025-HT Hi Team,
I would like to know if we have other products that can support 210c like the REF5025-HT that can be used as an alternative?
Regards,
Marvin
Part Number: REF5025-EP Hi Experts,
Seeking your assistance on this query:
We have a doubt regarding Output voltage noise, between the PN: REF5025AIDR and REF5025MDTEP. In PN: REF5025AIDR, the Voltage Noise = 3 µVPP/V (Pg: 5) and in PN: REF5025MDTEP,…
Part Number: REF5025 Other Parts Discussed in Thread: ADS1278 , TINA-TI I have a question about the REF5025 filter on the ADS1278 Evaluation Module.
In the above picture the output of the REF5025 connects into a LPF, consisting of R1 and C1. This filter…
Part Number: ADS1278EVM-CVAL I have a question about the REF5025 filter on the ADS1278 Evaluation Module.
In the above picture the output of the REF5025 connects into a LPF, consisting of R1 and C1. This filter has a cut-off frequency of ~1.59Hz. Why…
Part Number: REF5025 Other Parts Discussed in Thread: REF35 I am looking for a +/- 1.25V precision voltage reference solution for MCU. Does TI have an IC that will give you +1.25v and -1.25V precision voltage references?
Part Number: REF5025 Hi team,
I saw specacial cap esr requirement for ref5025:
I can understand why need <1.5ohm, but why it need to >1ohm, this is not easy to choose capacitor.
as cap esr is different from frequency, then what frequency should…
Part Number: REF5025 Hi, In our project, REF5025 is used for the ADC reference. The accuracy is very important thus we need to double check the reference is stable.
However, we have problems to measure the acurracy of REF5025 by 6-1/2 digital multimeter. The initial accuracy is 0.1%, that is 2.…
Part Number: REF5025 Hello,
I asked a question about TEMP pin output variation in the following thread the other day. I would like to calibrate the TEMP pin output variation. (Question) Is this variation constant with changes in environmental temperature…
Part Number: REF5025 Hello,
I am an FAE for a distributor that handles TI products. My customer made four prototype boards using the REF5025AID and measured the output of the TEMP pin. However, only one board outputs about 8°C (20mV) higher than the other…
Part Number: REF5025 Other Parts Discussed in Thread: INA821 , I have 3 ina821 instrumentation amplifiers and I need to provide a 2.5v voltage reference at the ref pin. Do I need to add a buffer when connecting three ina821 instrumentation amplifier ref…