Hello Per,
as far as I know the board with the sensor was never sold and only a few boards for the app note and for demo purposes are build.
The tool without the sensor eZ430 PaLFI is no more available for purchase.
The software with the Wireless…
Hello,
My company has Pallets in our factory that make use of Texas Instruments transponders to track location. From my research, these transponders are 134.2kHz.
Currently, we make use of the following TI equipment to read the pallet transponders…
i don't remember that the RI-STU-6350 (this is RI-STU-TRDC) was capable of providing RSSI info back from tag - that was discrete transceiver circuit onboard being driven by MCU, predating the RI-R6C-001A chip (which has RSSI/FSK output on pin 16), which…
Yunmi -
RE: the 32mm tags reading distance - see attached for idea of what is meant by what is in the data sheet - you will see same reader operated at two popular input voltages with various antennas.
the graphs represent max read range which is…
thanks for the reply of everyone. I just want find a product just like the rfid system in https://www.oregonrfid.com . and I want have more choice of the product of tags fish monitor in the fish ladder. maybe
RI-STU-251B-30【RFID 2000 RDR 134.2K 】is…
I am considering to replace the RI-RFM-007B-30 and RI-CTL-MB2B-30 for the RI-STU-251B-30.
I have 2 questions.
When replacing the RI-RFM-007B-30 and RI-CTL-MB2B-30 combination for the RI-STU-251B-30 will this be a 1:1 replacement? If not what should…
Savinda -
i doubt you will be successful here with your setup
antenna is too small and the output power will not be enough.
you really need a high power setup like what is in the attached, a large antenna and a large tag for this distance.
5074…
Dear KSA
We found a smaller product that has (in our eyes) the same functionality as the RI-STU-251B-30.
Control: RI-CTL-MB2B RFM: RI-RFM-007B
Can you recommend these units in combination with our antenna?
our initially planned setup was:
…
Amy,
if you are looking for a passive solution, the only battery-less I have seen was an LF HXD reader RI-STU-251B-30 connected to a 1 to 2 turns litz wire antenna 7 x 7 feet and the RI-TRP-R9TD-30 tag: http://www.ti.com/product/ri-trp-r9td
Reader…
Other Parts Discussed in Thread: TMS37157 Hi
One of our customers would like to use the TMS37157. For RnD they need a Reader like the RI-STU-251B.
My questions are:
1. Is the RI-STU-251B compatible to work with the TMS37157 tag. If not, does TI…
