Part Number: TMS320F280049C Other Parts Discussed in Thread: TIDM-1000 , , SFRA Hi Ti Team,
I'm using 3phase Vienna rectifier TIDM-1000 with TMS320F280049C controller.
This board is designed for,
1. Three-Phase Input 208 VL-L 60 Hz, Output 600-V DC…
Part Number: LAUNCHXL-F28379D Other Parts Discussed in Thread: SFRA , Hello,
can we connect the SFRA GUI with LAUNCHXL-F28379D ? or any further connections required like SCI - usb adapters ? for this launch pad
Regards
Anoop kumar
Hi Shashank, I Ran SFRA AC sweep in open loop for Boost on D.C. (load) of 15-20% (sweeping) I received the follow open loop bode plot and planed compensator targeting GM=29.55 PM=78.97
therefore I took Kp and Ki and implement it on my Boost PI controller …
Yong,
SFRA supported for F2800137. Same steps can be followed as per user guide. [ C2000 Software Frequency Response Analyzer (SFRA) Library User’s Guide (Rev. A) (ti.com) ]
Thanks,
Shashank
Part Number: TMS320F28379D Other Parts Discussed in Thread: TMDXIDDK379D , SFRA Hi Team,
The board type used by the customer is IDDK - TMDXIDDK379D and is testing Level6-SFRA functionality. Configure the SCI as described in the SFRA guide: But found that…
Part Number: TMS320F28379D Other Parts Discussed in Thread: TMDXIDDK379D , SFRA Hi,
Ti friends!
The board type used by the customer is IDDK - TMDXIDDK379D and is testing Level6-SFRA functionality. Configure the SCI as described in the SFRA guide: But found…
Hello Shashank,
I figured there were some incorrect switch positions on the TMS320F280039C controlCARD and then after making the firmware changes in VBUS_CLK that you mentioned, it is working.
SFRA is now getting connected.
Thanks for the help and support…
There are two reasons which can be possibility for issue:
Example which is available in C2000 DPSDK > libraries > sfra > examples is only for F28004x series and has corresponding cmd files, codestartbranch asm files. So, we can’t use direct example to…
Ethan,
It is required to change pre-defined symbol to "SFRA Enable" for enabling SFRA.
You can add line after ".codestart" as in snippet of project_folder/src_device/f280013x_flash_lib.cmd.
Regards,
Shashank
Jack,
This is what they mentioned.
The change is explained at https://software-dl.ti.com/codegen/esd/cgt_public_sw/C2000/20.2.0.LTS/README.html#default-file-extension-for-compiler-generated-object-files . Even though that is from the version 20.2.0.LTS…