Hello Haiwei,
Thank you for your patience.
Haiwei Zhang said: There are examples for testing DDR inline ECC in the SDK, including main esm example s for R5 and mcu esm example s for M4 and R5, but no related example s for A53.
Unfortunately, There is no support…
Hi Jonathan,
Jonathan Cormier said: Is SDK9.1 going to bump the kernel or u-boot version?
Yes, the kernel and u-boot would sync to the upstream latest 6.1 kernel and 2023.04 u-boot respectively, plus patches added by TI.
Jonathan Cormier said: What I'm…
Part Number: AM6412 Other Parts Discussed in Thread: AM3352 ,
Hi Support Team,
The following tool was used to check the DDR registers in the AM3352.
https://www.ti.com/tool/ja-jp/SITARA-DDR-CONFIG-TOOL
My customer would like to use the same tool for the…
Part Number: TDA4VM-Q1 Hi Kevin,
Background is customer Hirain use same board but different config .h file, one can work and other will fail. the one worked they missing the excel form, so they want know what the difference between this two .h file refer…
Part Number: TPS25750 Hi,
I've been searching for info about the GPIO internal configuration of the TPS25750.
In the TPS app GUI advanced configuration, Open Drain, internal pull-up/pull-down don't seem to be exclusive.
If I want a push-pull behavior…
Hideaki-san,
1. Yes, refresh rate should be changed manually in the tool as needed
2. The tool will choose 00b Manual mode normal for 40-85C, and 11b ASR modes for all other operating temp ranges.
3. To choose Manual mode - Extended, the customer would…
Part Number: AM6442 Other Parts Discussed in Thread: SYSCONFIG Dear TI team,
a while ago (e.g. here, 1 year ago: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1087341/am6442-ddr-config-tool-for-am64x ) I used to be able to download…
Part Number: AM623 Other Parts Discussed in Thread: SYSCONFIG Dear TI support,
I have question to DDR config for Sitara (AM62). I’d like to know what “Operating Temperature Range” does. I believe it should set dual refresh but if I set -40C to +95C then…
Hello Pratap,
if a call is not possible, what should be the next step to be done to analyze the issue?
For testing purposes Novica configured the WKUP_UART at the beginning in main() of the flashwriter application to check if main() is started, but there…