Hi Ki,
Are you able to do a chip-erase in Uniflash?
Which SDK are you using? For the latest 7.20 SDK, the release notes recommend CCS 12.4, can you try that out?
Also, can you try interacting with the board using SmartRF Studio 8? ( https://www.ti.com…
Part Number: SMARTRFTM-STUDIO Other Parts Discussed in Thread: CC1120 we're going crazy with the smartRf study. we're using Version 2.13.1 of Smart RFStudio
We made a configuration on CC1120 registers, however, if we change to an other tap software…
Hi Henrik,
No problem, glad I could help clarify.
SmartRF Studio puts the device in a special mode, where the device is not technically running instructions from flash (so any FW present on the device is unaffected by SmartRF Studio).
Henrik Smeds said…
Hi,
You can select the front-end using CCS as you show in the screenshot.
The CC1311P3 has a programmable output power (PA table), so to output +10 dBm you can select this output power from the PA table for the CC1311P3 (for 868/915 MHz operation). More…
Part Number: SMARTRFTM-STUDIO Other Parts Discussed in Thread: CC1310 Tool/software: TI-RTOS Previous version of SmartRF Studio 2.13.0 has template for TI-RTOS, but current version has not this template. Why?
I use cc1310 with settings:
// Parameter …
Part Number: CC2650 Hi Team LPRF,
Trying to download Smart RF studio from.. http://www.ti.com/tool/SMARTRFTM-STUDIO I get the following very descriptive ;^) error message..
Thanks, Merril
Hi Alfred,
Are you asking for radio config settings?
Have you used SmartRf studio to evaluate RF performance of devices?
Typically, we suggest customers to use SmartRF studio to set up all their requirements, and it generates the radio configuration settings…
As for this purpose you are trying to investigate the low range you are observing, are you able to use SmartRF Studio 7 to control the boards? It removes a lot of the potential variables and is the recommended tool for evaluating the PHY settings (and…
Part Number: SMARTRFTM-STUDIO Tool/software: Code Composer Studio When using CCS9 with SmartRF Studio and Flash Programmer 2 (all latest versions, downloaded today), every time you switch betwen apps, the XSD110 debugger firmware needs to be reloaded and…