Part Number: SN74AHC1G14 Hi team,
The customer uses the 3.3v VCC and 5v Vi, does it have problems? If it has problems, the customer can use resistor divider the voltage. But it may influence the slew rate of the signal. Do you have some recommendation…
Part Number: SN74LV4T08-Q1 Other Parts Discussed in Thread: SN74AHC1G14 , SN74LVC1G14 Tool/software: Hi TI E2E
I have need of a circuit that requires a delay time of approximately one second. In order to prevent any issues with shoot through on the…
Part Number: SN74LVC1G11 Other Parts Discussed in Thread: SN74AHC1G14 , , SN74AHC1G04 Hi team,
does SN74LVC1G11DCKR P2P with 74AUP1G11GW? or do we have a better suitable P2P one?
also does SN74AHC1G14 P2P with 74AHC1G04GW? or do we have a better suitable…
Part Number: SN74AHCT1G14 Other Parts Discussed in Thread: SN74AHC1G14 , SN74LXC1T45
So I've been simulating the SN74AHCT1G14 on LTSpice. According to the data sheet, it is approximately Vt+(min) = 1.0 V and Vt-(min) = 0.55 V for Vcc = 5.0 V.…
Part Number: SN74LVC1G14 Other Parts Discussed in Thread: SN74AHC1G14 , SN74AUP1G14 I use the device to shape a slowly changing signal in order to be able to process the signal with normal logic. During tests I came across a strange behaviour of the device…
Part Number: TMS570LC4357 Other Parts Discussed in Thread: SN74AHC1G14 Hi all,
Please suggest if ARM10 pinout can be used for programming of above module.
Means indirectly asking to use nRESET pin instead if nTRST.
Vikas Dabas
India
Part Number: SN74AVC8T245 Other Parts Discussed in Thread: SN74AHC1G14 Hi all,
I have a question on SN74AVC8T245.
The test conditions for VOH and VOL in the data sheet are -100uA (VOH) and 100uA (VOL). What is the VOH and VOL for -500uA and -300uA…
The SN74LVC1G17-Q1 datasheet specifies I off .
The SN74AHC1G14 datasheet specifies I I for any V CC , including 0 V. The outputs are not protected against overvoltage.
