Part Number: SN74LVC1G3157 I am writing to inquire about the part CMOS SPDT Switch ( SN74LVC1G3157).
For one of our project, we currently designing a circuit that will utilize this component, I need to understand the test condition for Switch On Resistance…
Part Number: SN74LVC1G3157 Other Parts Discussed in Thread: TS5A3159-EP We are looking to secure this exact same part (SN74LVC1G3157) but with a -55C to +70C operating temp. Is that something that is available?
Part Number: SN74LVC1G3157 Hi,
We use SN74LVC1G3157 and we received the part from 2 different Suppliers with different markings which I believe is something like Date / Year Code.
Please advise how to interpret them. And one of the Part (as marked) is failing…
Part Number: SN74LVC1G3157 Hi, Ti support team
while I was reading datasheet of SPDT, I noticed that TI application doesn't recommend applying signals to A pin before the IC is fully turned on.
refered from
' 9.2.1 Design Requirements The inputs…
Part Number: SN74LVC1G3157 Other Parts Discussed in Thread: TS5A63157
Hi Team,
We have 2 custom made PCBs A and B.
PCB A has this part 'SN74LVC1G3157DBVR' used to pass a 3V line to a OPAMP circuit.
The control for 'SN74LVC1G3157DBVR' is from MCU…
Part Number: SN74LVC1G3157 Other Parts Discussed in Thread: TS5A63157 , TS5A3157 , , TS5A3159A Hi,
If VCC is no supply and pin4 (A) is applied 3.3V, will there voltage leakage to pin1, pin3, pin5 or/and pin6?
Thanks and Best regards,
Tiger
Part Number: SN74LVC1G3157 Other Parts Discussed in Thread: TS5A63157 , TS5A3160 你好,ti专家
SN74LVC1G3157在VCC没有上电的情况下,A端口是否能可以有电压。
按datasheet的9.2.1描述,需要等待到VCC建立后才可以加信号,我们的应用是 SN74LVC1G3157在目标电路板的接口上,外加的信号由其他电路板提供,不受SN74LVC1G3157目标板控制。
Part Number: SN74LVC1G3157 I have a somewhat specific question about the implementation of clamping diodes:
From the fact that in the datasheet there is a pos/neg max. current specification (50mA) for the "IO port diode current" I conclude that there…