Part Number: TAS5760M-Q1 Hi E2E,
As the datasheet of TAS5760M-Q1 shows that : Supply Voltage at 14V 、RL= 4 Ω、 THD+N 10% . The max output power=25W.
I want to know i f we design an application on this condition( Supply Voltage at 14V 、RL= 4 Ω、 THD…
Part Number: TAS5760M-Q1 Hi team,
Want to check with you one information about TAS5760M-Q1, is left channel control in register and I2S for SPK_OUT and right channel for SPK_OUTB?
Thanks.
Johnny
Part Number: TAS5760M-Q1 HI TI
When the customer is using tas5760, there is no problem with the input signal and power self inspection, but there is no output signal. The AVDD voltage is 12V. The customer has the following questions
1.SPK_ SD (pin…
Part Number: TAS5760M-Q1 Hello,
Our customer plans to use TAS5760MTDAP-Q1 instead of TAS5760MDAPR because of delivery issue.
In general, those are same silicon and specification but different temperature range and different test program for higher…
Part Number: TAS5760M-Q1 hi ti
SCLK and MCLK are connected together in the customer's hardware schematic diagram. Is it OK? Is there any problem? The PCB hasn't come back yet.
Part Number: TAS5760M-Q1
Hi Team, seeking for some assistance.
We want know the LC filter design calculation for PBTL mode in audio amplifier.
https://www.ti.com/lit/an/slaa701a/slaa701a.pdf
In the above link ,They gave the details about LC…
Hi Jung
Jung woosung said: We need to know why 0x08 is written in register 0x01(Power Control)
I'm afraid our device won't change this register value by itself, the register need to be changed by I2C command. We could try to capture the I2C data at…
Part Number: TAS5760M-Q1 Hello,
any updates about the issue below?
https://e2e.ti.com/support/audio-group/audio/f/audio-forum/994731/tas5760m-q1-oce-bit-set-at-turn-on
regards,
Jacopo
