Hello AbdelRahman Ahmed,
Thank you for the query and sorry to not the non availability of the solutions and he devices you are looking for.
TI does not provide switch solution.
Please refer below to implement a dual Ethernet solution
https://www.ti.com…
Part Number: DP83867IR Other Parts Discussed in Thread: TIDA-00204 Datasheet for DP83867IR states max input (Vpp) is 1.9V.
However TIDA-00204( https://www.ti.com/tool/TIDA-00204 ) Shows the device being driven by 3.3V clocks (see below excerpts from schematic…
Part Number: DP83867E Other Parts Discussed in Thread: TIDA-00204 Hi Support team,
We have 2 Ethernet ports which are connected to FPGA through 2# DP83867 Ethernet phy with SGMII interface.
Due to IO shortage at FPGA side, Planned to short MDC of PHY1…
Part Number: DP83867CR Other Parts Discussed in Thread: TIDA-00204 Hello,
We are using a custom setup with a SOM (with AM335x) and a base board where we wanted to migrate to a new PHY (from AR8035-AL1A to DP83867CRRGZ). So here are my questions:
On page…
Part Number: DP83867CR Other Parts Discussed in Thread: TIDA-00204 Hello,
We have designed a 6-layer daughter board with DP83867CRRGZ phy where we mount a SOM with a Sitara AM335x and we are experiencing some issues connecting to our local network.
We…
Part Number: DP83867IR Hi,
I have a similar question to DP83867IR: TIDA-00204: Layout RGMII Signals . In EMI/EMC-CompliantIndustrialTempDual-PortGigabitEthernetReferenceDesign it says RGMII signals should be length matched to .254mm, in the answer in the…
Part Number: DP83867IS Other Parts Discussed in Thread: DP83867IR The datasheet for the DP83867IS says there are internal termination resistors for the transmission lines...
Some reference designs for the DP83867IR show 0Ω resistors on the transmission…
Hi Toshihiro-san,
Please provide the details of the test customer run. We have run the Immunity test on DP83867 and results are documented in User Guide.
http://www.ti.com/tool/TIDA-00204
Regards,
Geet
Part Number: AM5728 Other Parts Discussed in Thread: TIDA-00204
Dear team,
we are working to pass compliance tests for DDR3 memory with AM5728, unfortunately we are failing (Jedec Standard JESD79-3-1A.01).
Can you share any test reports that were passed…
Part Number: DP83867CR Other Parts Discussed in Thread: TIDA-00204 Hello,
the DP83867CR Datasheet SNLS484E March 2017 shows a "Typical Appliction: Magnetics" in chapter 9.2.1.1 Figure 30. However, also discussing with colleagues, I think the 10…