Part Number: TIDA-00254 Other Parts Discussed in Thread: DLPLCR4500EVM I am using it for implementing oral scanner, which means it requires smaller size of view and shorter projector distance. Can I adjust the field of view and projector distance through…
Part Number: TIDA-00254 Hi Team,
Our customer would like to know if it is possible to use the TIDA-00254 with the BlackFly S Series from Flir and which camera specifications are necessary to use with the Reference HW.
Regards,
Danilo
Part Number: TIDA-00254 Hi, Good day. Our customer has the following question; When using DLP_LightCrafter_4500_3D_Scanner_Application.exe the projector connects but the camera does not. The error is CAMERA_ID_INVALID. In DLP_LightCrafter_4500_3D_Scan_Application_Config…
Part Number: TIDA-00254 Other Parts Discussed in Thread: DLP-ALC-LIGHTCRAFTER-SDK Dear
I will test TIDA-00254 with point Color cameara
-. FL3-U3-13S2C (Rolling Shutter)
Is that support with Point clould and TI Reference SW using TIDA-00254?
Thanks
Part Number: TIDA-00254 Hello, everyone,
I have successfully compiled the SDK by commenting out the PG Flycam drivers in the CMakeLists.txt file. In the next step I set the parameters of my camera to fixed values. In my case on 2056 x 1542 pixels of the…
Part Number: TIDA-00254 Hi E2E,
Good day!
Do you have any information regarding the accuracy (x, y, and z) of the 3d scanning capability of TIDA-00254?
Thank you for your usual support.
Best regards,
Franz
Part Number: TIDA-00254 Other Parts Discussed in Thread: DLPLCR4500EVM We are preparing to develope structed light camera with DLPLCR4500EVM,
Maybe encounter some issues from hardware or software, so some supports are needed.
Could you supply technology…
Part Number: TIDA-00254 Hello,
Since I dont have Point Grey Fly camera required for this application. I decided to use my industrial camera as OpenCV camera. But the resolution is fixed at 640x480 ,which is an issue.
Is there any possibility to increase…
Part Number: TIDA-00254 Other Parts Discussed in Thread: DLPLCR4500EVM Hello!
I am using the reference design TIDA-00254, with DLPLCR4500EVM.
I can set the led current value to all 255 with DLPLCR4500GUI-3.1.0 and no problem.
When using the reference…