Part Number: ADS131A04 Other Parts Discussed in Thread: TIDA-00810 , CDCLVC1102 AD conversion value is not returned at multiple device configuration using synchronous slave mode.
I conect two ADCs and mode settings are 32bit, no hamming, slave mode. Also…
Hello Zilin Li73
Good to hear that.
We have other TI designs including TIDA-00080, TIDA00834, TIDA-00810, TIDA-00835 that you could refer to based on your application need.
Thanks
Sreenivasa
Hi Brian,
Here are a few TIPD's you can review: We have used AMC1301 and AMC1100, AMC1200 in TIDA-00834 and TIDA-00810 and TIDA-00835 for measuring the AC voltage input. Additionally we have TIDA-00555 that showcases measurement of Voltage and Current…
Part Number: ADS131A04 Other Parts Discussed in Thread: TIDA-00810 Hello ,
In a new design we are using a ADS131A04.
It seems that there are no source code example exists for this chip, but maybe I am wrong , please let me know.
Thanks and Regards,
…
Part Number: ADS131A04 Other Parts Discussed in Thread: TIDA-00810
Hi, we are designing a 4 channel sonar data sampling system, and we are going to use ads131a04 as the ADC converter. After reading the datasheet and some other related resources, we are…
Hello Lovekush,
Please refer to the timing requirements and the switching characteristics in Table 7.6-7.7 as well as the diagram in Figure 1 for Asynchronous Interrupt Mode. As you can see, the rising edge of SCLK is used to shift data into/out of the…
Hi Cynthia, I am implementing the circuit and doing simulation as well. I am not sure whether I understood you. In this case, the limiting factor is minimum input bandwidth of ADS8568 - 6.7 MHz and AMC1301 output is 100 kHz ?
I have also seen several refer…
Hello All
We have a couple of designs where we are showcasing how we can do diagnostic.
TIDA-00810, TIDA-00807 can be referred to understand diagnosis.
Some of the ADCs provide indication of Faults (Internal or External).
What functionality are you looking…