Part Number: TIDA-01485 Hi,
i have a quick question.
I am not sure about what DC_FB is for?
It is connected to the powersupply section and the MCU analog input from my understanding. Also the caps from the BOM are just rated for 50V but the maximum input…
Part Number: TIDA-01485 Other Parts Discussed in Thread: DRV8323 , MSP430F5132 Hello,
I am trying to modify the reference design code such that the motor will freewheel (DRV8323 Sleep Mode), after the motor stops. Disable works after the initial run, but…
Part Number: TIDA-01485 Cap 2.3.1 pag 6 row 10.
There's a typo in ADC voltage input range calculation.
"Considering a 10% headroom for this value, the maximum recommended voltage input to the system is
25.3 × 0.9 = 42.5."
The correct…
Part Number: TIDA-01485 Other Parts Discussed in Thread: ENERGIA , MSP430F5132
Hello,
I had this PCB built for educational purposes, but I have not been able to get it to work. I have a few questions.
(1) SL_C is shown connected to C18 to the right of…
Part Number: TIDA-01485 Other Parts Discussed in Thread: MSP430F5132 Hello,
This design uses P3.0 and P3.1 for UART communications, but I am not able to get it to work. I am able to get serial communications working using P1.1 and P1.2 for UARTutilizing…
Other Parts Discussed in Thread: ENERGIA , MSP430F5132 Hello,
I had this PCB built for educational purposes, and I have not been able to get it to work yet. I have a few questions.
(1) On sheet 4 of 5 of the schematic, SL_C is shown connected to C18 next…
Hi,
Please refer to TIDA-01485 too. ( www.ti.com.cn/.../TIDA-01485 )
But this is also the 6*PWM scheme. For the 1*PWM drive scheme, you can refer to TIDA-010031( https://www.ti.com.cn/tool/cn/TIDA-010031?keyMatch=TIDA-010031 ), which has 1*PWM code, but this…
Part Number: MSP430F5132 Other Parts Discussed in Thread: TIDA-01485 , MSP-EXP430FR2433 , , MSP430FR2433 , MSP430WARE
Tool/software: Code Composer Studio
Reference design: TIDA-01485
Tool/software: Code Composer Studio
I have been working on a reference d…
Ashish,
Please take a look at these reference designs which should help:
https://www.ti.com/tool/TIDA-010072
https://www.ti.com/tool/TIDA-01485
https://www.ti.com/tool/TIDA-010031
Regards,
-Adam