Part Number: TIDA-01604 Dears,
The SIC MOSFET of the TIDA-01604 board seems to be applied as a white ceramic insulator. The customer wants to know the name of the insulator in the red box in the picture and how to assemble the sic mosfet on the heat…
Part Number: TIDA-01604 Hi EXpert,
I have some questions about below description.
"When the AC input changes from the positive half line to the negative half line at the zero-crossing, theduty ratio of the low-side high-frequency switch SiC2 changes…
Part Number: TIDA-01604 Hello，recently I'm learning about the Tida-01604，and I have some question about the current loop model and DC bus regulation loop.
could you help me to show the process of the equations' derivation from the control model…
ADC_Vac_Vbus_Ii contents of the sheet in the Calculation.xlsx file. The ACS716 shown here is different from the ACS716 in the schematic diagram of the TIDA-01604. I want to know exactly what the values of Re, Rf, Rfltr and Cfltr are in the schematic of…
Part Number: TIDA-01604 Hi Expert,
I have question about below system diagram. As discussed earlier in this TIDA, it only says use two phase for positive half cycle and negative half cycle. Whereas in the real design, there are three phase with 120…
Part Number: TMS320F280049 Other Parts Discussed in Thread: TIDA-01604 Hi, support team
My customer has the questions as follow:
I have gone through TIDA-01604 design
1. Is it possible to design 7.2KW?
I need to convert 220vac, 50hz to 700vdc…
Part Number: TIDA-01604 Hi expert,
I cannot find the ADC, PWM, Control ISR Timing Chart, Could you provide me the detail chart about when ADC is coverted and its relationship with four PWM, and when control ISR (100kHz) is start runing.
Thanks…
Part Number: TIDA-01604 Hi all,
I am using EPWM1A and EPWM1B in complementary mode to switch two MOSFETs. During the zero-crossing interval of my AC input voltage, I need to provide a blanking interval where both my EPWM1A and EPWM1B turns OFF i.e.…
Part Number: UCC28700-Q1 Other Parts Discussed in Thread: TIDA-01604 , UCC28700 , Hi, support team
My customer has the questions as follow:
I have gone through TIDA-01604 design
1. Is it possible to design 7.2KW?
I need to convert 220vac,…
