• 

  Sulyn ZHANG

  • over 2 years ago
  • Interface
  • Interface forum

  RE: TUSB8041: TUSB8041 Schematic check for Customer

  Hi JMMN, Thanks for the support! The reference schematic I mentioned is showed in below link: http://www.ti.com/tool/TIDEP0046 As you can open it see the schematic in it. The pull down resistor on USB_VBUS pin is 16kohm here but not 10kohm showed...
• 

  ran35366

  • over 4 years ago
  • Processors
  • Processors forum

  RE: AM5718: OpenCL profiling support/tools for C66x DSP

  Hi Weston My understanding is that you try to benchmark DSP execution from OpenCL environment. OpenCL has a good tool to do this. Look at TI Design www.ti.com/.../TIDEP0046 and see how the design measures time of execution using the Event object ...
• 

  ran35366

  • over 3 years ago
  • Processors
  • Processors forum

  RE: CCS/66AK2L06: mpmcl load fails

  Hi Ari, I apologize but I did not tell you an important fact (you may already know it) If the same logical address is covered by two MPAX registers, the translation to physical is done using the higher number register So for example, if MPAX 0 maps...
• 

  ran35366

  • over 4 years ago
  • Processors
  • Processors forum

  RE: 66AK2H14: OpenMP controlling the ARM/DSP cores without using Linux OS

  Joe openMP is used when you have C66 multicore project. This project can be called from OpenCL or from any other way the system starts. I suggest you do two things - First look at TI Design www.ti.com/.../TIDEP0046 It may be on AM572X that has...
• 

  ran35366

  • over 4 years ago
  • Processors
  • Processors forum

  RE: How to choose the implementation solution for porting project on K2H?

  The user can use any of the many DSP optimized library routines as well You can see teh OpenCL example in TI design http://www.ti.com/tool/TIDEP0046 Ran
• 

  ran35366

  • over 4 years ago
  • Processors
  • Processors forum

  RE: float_compute benchmark

  Tony DSP execution is very efficient in complex code. You are right that in AM57X because the DSP runs slower than the ARM, it is better sometimes to implement applications on the ARM and not the DSP. For example, in TI's implementation of OpenCV...

Didn't find what you are looking for? Post a new question.

• Ask a new question