Part Number: TIDM-02013 Other Parts Discussed in Thread: TIDA-01606 Hi,
As shown in image, it is only shown how AC to DC is converted.
But it is not shown how DC to AC current flows happen?
-Also is there any other topology for bi-directional for PFC…
Hi E2E,
Does TI have an LED control IC solution for AC/DC, 48Vout/300W Hope it can meet the following functions 1. CC mode / CV mode 3. Dimming Control the brightness need all three types (1) duty (2) Voltage (3) Resistor
Regards Rock
Part Number: UCC28740 Other Parts Discussed in Thread: TIDM-02010 , Hi, we design our controller PCB for aircon, from reference TI design "TIDM-02010 Dual motor control with digital interleaved PFC for HVAC reference design".
Presently we are facing…
Hello Venkatesh,
Sorry, for the delay in responding to your question. Currently we have TIDM-02013 ( https://www.ti.com/tool/TIDM-02013#design-products ), the 7.4kW 1-ph AC OBC reference design. The AC-DC stage of this design is a TTPLPFC. But, the PFC…
Part Number: TIDM-1000 Hi all,
I have completed testing the TIDM-1000 from Build 1 to Build 4 and operates normally. However, I encountered the same issue as this article. In Build 4 the iTHD is more larger than Build 3.(After disconnecting the bus voltage…
Part Number: TIDM-3PHMTR-TAMP-ESD Other Parts Discussed in Thread: MSP-EM-DESIGN-CENTER , Hello,
I would like to ask you please about the possibility to measure single phase AC quantities or DC quantities using this design?
With regard to the CT's and voltage…
Part Number: TIDM-1000
Hi all,
I have completed testing the TIDM-1000 from Build 1 to Build 4 and operates normally. However, I encountered the same issue as this article. In Build 4 the iTHD is more larger than Build 3.(After disconnecting the bus voltage…
Hello Andy,
Thank you for your interest in TI products. I do not think that your design will work well. You cannot simply tie multiple boost PFC outputs together. If you do, then your THD and PF will be poor. You need to track the current and phase of…
Hello.
I am proceeding in order by looking at the document you mentioned.
However, I cannot proceed to the next step because Putty’s COM port communication does not work.
The FTDI_TX LED on the PCB turns on and then turns off after a while, but…
Part Number: TMS320F280049C Other Parts Discussed in Thread: TIDM-1007 Tool/software: Code Composer Studio Dear Sir,
About the project of Design Guide: TIDM-1007, TIDU61B.
1) The first phase current IL1 is routed to CMPSS1, then from CMPSS1_CTRIPH_OR_L…