Part Number: TIDM-GBD-ROBUST Dear all
www.ti.com/.../TIDM-GBD-ROBUST
I have two questions about this reference desgin:
1. Microphone is Panasonic WM-61A, but it will be suspend, so is there any other recommended ?
2. The picture of link is below…
Part Number: TIDM-GBD-ROBUST Other Parts Discussed in Thread: MSP430F2274 Dear all
I want to use this reference degsin for my new project, could you share me software with C code ? I check the software, it is assembly language.
Hello Piero,
The source code can be found under the software section of the product page.
www.ti.com/.../TIDM-GBD-ROBUST
You can also use the direct link below.
www.ti.com/.../slac599
Electric vehicle (EV) charging systems are of two types: AC and DC. The AC charging system has to interface with the EV's internal on-board charger (OBC) before reaching the battery. The DC charging system interfaces with an external Electric Vehicle…
Hi Jejomar,
Jejomar Ildefonso said: - In daisy chain FSI, are digital isolators (example: ISO7820LL) like signal repeaters?
Digital Isolators will act as buffers for the single-ended signals.
Jejomar Ildefonso said: - Would using them lead me to increase…
Hello Manoj,
What you would want to do is run an FFT or sound samples and match the FFT profile of a clap with what you are inputting. We have something similar for Glass Break Detection linked below. www.ti.com/.../tidm-gbd-robust
That being said…
Saurabh,
I'm still not sure what your issue is with the description you have given so far and the video you have provided. I'm assuming here the MSP430 is controlling the LCD, and I see the LCD coming on each time. I do not recommend rapidly turning on…
Aldo, Have you seen the LMC567 ? Low Power Tone Decoder
Supply current is 500uA typical at 5V, 300uA at 2V. LM567 current is 7mA typical at 5V, LM567 will not work below 4.75V
LMC567 is 2V to 9V supply range. LM567 is 4.75 to 9V.
Have you considered using…
Hi guy,
ESD protection is to make your system more robust. You can add ESD diode, Cap, or resistor to limit the damage.
ESD protection has different level. Mostly to do this, is because you need to pass ESD test.
TIDM-3PHMTR-TAMP-ESD is not a product…
Hey Gaurav,
Based on the TIDM-BIOSIGNMONITOR User's guide, section 3.1.2, the human skin resistance can very between 20 M ohm to 50 ohms. This circuit was designed to be able to measure this with good resolution and keep the output between the MSP430…