Part Number: TIDM-NFC-EZ430-MODULE Other Parts Discussed in Thread: RF37S114 We have a design that's based on the TIDM-NFC-EZ430-MODULE (NFC EZ430 reference design). It reads ISO 15693 tags from smartrac without any issues. I'm trying to use it to…
Part Number: TIDM-1007 Other Parts Discussed in Thread: PMP23069 , TMCS1100 , TMCS1107 Team,
Since CS722LLCTR-10AB-T and TMCS1107A2BQDR are P2P it should be possible to use TMCS1107A2BQDR as well in this design. -Could you please comment if some HW change…
Part Number: TIDM-NFC-RW Hello,
We have tested this EVM and we are getting range around 6 CM at 18 DB gain.
We want higher range up to 12 CM, how can we increment the range with same EVM board.
Or Is there any external antenna available for this requirement…
Hello LouEEEE,
There are two options available for you when using the TM4C129.
1) What I initially proposed which is to port the DESFire firmware to the TM4C129
Obstacles:
Porting from MSP430 to TM4C including moving code to ARM architecture
Possible…
Part Number: TRF7970A Dear All,
I hope you are doing well.
I am facing an interesting issue. I am working on adding the support of NFC P2P mode in my project. I used the code example provided in as a base. However I am witnessing that only passive P2P…
Part Number: MSP430FR5739 Where can get the source code of the reference design?
https://www.ti.com/tool/TIDM-BATTERYLESSNFCKEYBOARD?keyMatch=nfc
Battery-less NFC Keyboard source code
Part Number: TIDM-TM4C129XNFC Tool/software: TI-RTOS Hi,
I need to read ISO14443A/B Type 4 NFC cards, so I’m using:
This setup: www.ti.com/.../TIDM-TM4C129XNFC
These instructions: www.ti.com/.../tiduag2a.pdf
To support this software I have…
Part Number: TRF7970A Other Parts Discussed in Thread: MSP430F2370
Hi,
My customer is using MSP430F2370 with TRF7970A.
We can read the card, but no idea how to write it.
Any idea how to do it?
BTW, we ever try to port this feature to MSP430F2370, but…
I'm looking at the example PCB in tidrjd7 and the stack-up description in tirjd6. The impedance calculation for the antenna feed stripline from L2 doesn't yield 50ohm given the 30mil traces. The trace impedance calculates to about 95ohms. I must…