Part Number: TL594 Tool/software: Dear TI Support Team,
I would like to ask a few technical questions regarding the TL594 PWM controller IC, particularly related to the characteristics of its internal error amplifier. These details are not listed in…
Part Number: TL594 Tool/software: I have a question about the TL594 output circuit.
Is there a simple way to make the output 5V when using 15V for the Vcc of the TL594?
For example, if I connect 15V to Vcc, connect the C terminal to 5V, and connect…
Part Number: TL594 Tool/software: Hi all,
My customer uses a TL594 to control CCCV charging using the following forward circuit.
【The conditions】
Vin:350V
Vout:4V
Fsw:50kHz
The output voltage increased by about 6~60 mV. However, the measurement…
Part Number: TL594 Tool/software: Hello.
I am making a charger using TL594.
When charging is finished, the DTC terminal is pulled up to the reference voltage by a signal from the CPU. Even if the DTC terminal becomes 5V, operation does not stop. …
Part Number: TL594 Could you please confirm what happens to the TL594's output when two of the TL594's error amplifiers are active at the same time? After all, the higher voltage is just output, so isn't it a particular problem for the TL594?
Part Number: TL594
Hi,
What is the maximum value of Collector off-state current when Vc=Vcc=12V and VE=0V?
If there is no data, could you tell me the formula to calculate the maximum value?
Best Regards,
Nishie
Part Number: TL594 Hello, experts,
This is Koki Tsushima.
My customer has an interested in TLC, especially sync.
Could you answer following questions?
Q.1Is it possible to use TL594 by synchronizing from clock on circuit?
Q.2Is it possible…
Part Number: TL594 Hi experts,
I understood sync. can be easily achieved as follows.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1131042/tl594-want-to-sync-two-tl594
Customer wants to create other…
