Part Number: TLC6C5716-Q1 Hi Team,
I am working on TLC6C5716-Q1 communication to micro via SPI. Is there any reference guide/ sample code/ fit data documents available to Kick start the project.
Part Number: TLC6C5716-Q1 Tool/software: Hello TI Team,
We are designing an LED application. We are looking to use a power management chip which would shut off the 3.3V supply. The 5V sense would still be powered. Would this approach shut off the…
mam,
Sorry for the delay Mam.
sample code is another LED driver which is TLC5948A but mine is TLC6C5716-Q1. If you provide a sample code of TLC6C5716-Q1. I will be thankful to you mam Pranav
Part Number: TLC6C5716-Q1 Tool/software: Hello,
We are designing a custom board using the TLC6C5716-Q1. We are wondering if it is necessary to disabled GCLK while writing GS data, or if it is possible to leave it free running. The example code in…
Part Number: TLC6C5716-Q1 Tool/software: Hello,
We are looking for the IBIS model for the TLC6C5716QDAPRQ1 part. Is there any way we could get one?
Thank you,
Sam
Part Number: TLC6C5716-Q1 Other Parts Discussed in Thread: TLC6C5724-Q1
Tool/software:
Hi Team,
Do we have FMEDA and safety manual for TLC6C5716-Q1 and TLC6C5724-Q1 ? Please help send email to me.
Thank you!
Marc
Part Number: TLC6C5716-Q1 Tool/software: Hello TI Team,
We are working on an LED application and are doing some prototyping. We found that when we go to turn on all the LEDs that R0 is significantly dimmer than the rest of them and that the ERR pin…
Part Number: TLC6C5716-Q1 Dear expert,
Customer choose 1.5K for resistor for IREF and measured Iout(MAX) is only 10mA.
It doesn't match below curve.
Could you give your comment? Thanks
Part Number: TLC6C5716-Q1 Other Parts Discussed in Thread: TLC5916-Q1 Dear expert,
How to estimate TLC6C5716-Q1 power dissipation?
For example, VCC=3.3V, LED current= 10mA, LED supply = 5V, LED voltage = 3V (5-3=2V is burn in TLC6C5716-Q1 , right…
Part Number: TLC6C5716-Q1 Other Parts Discussed in Thread: TLC6C5712-Q1 Hi Team,
Do we have appropriate solution that can replace PCA9955B? 25mA/ch is ok, but it needs I2C control.
Regards,
Roy