Other Parts Discussed in Thread: TLK1221 Hi All:
Because TLK1221 datasheet didn't show out TX data timing, customer followed figure 9 to measure hold time. Our spec. min. hold time is 0.8ns, but customer got 0.72ns. Could you tell me whether test condition…
Part Number: TLK1211 Other Parts Discussed in Thread: TLK1221 Tool/software: Hi team
There are several quesions. Could you support this?
Q1. Could you tell which signal RBC0 would be synchronized?
Q2. According to the datasheet as below, RBC0…
Hi, my inputs below.
The TLK1221 is intented for Gigabit Ethernet applications. On the egress path the SerDes expects 10-bit parallel data output from a protocol device to for serialization and transmission. On ingress path a 1.25Gbps serial stream…
Other Parts Discussed in Thread: TLK1221TLK1221
We've just received an EOL notice for part number TLK1221 with the recommended replacement to be TLK2201.
Can the TLK2201BIRCP which supports data rates from 1.2 Gbps through 1.6 Gbps ... be clocked…
Hi Michael,
1、Is there reference schematic design?If you have this reference,can you send to my email:wancheng.jiang@ejitec.com.
In TI's official web,I only find reference design about TLK1221.The user guide of TLK2711A's EVM,there is not schematic…
Hi Mircea,
TLK3101 does not support Gigabit Ethernet, this device operates from 2.5 to 3.125Gbps (Backplane application) . This device uses the 8b/10b encoding algorithm that is used by fiber channel and gigabit ethernet, although, this process is…
Hi Andrew,
The intermediate block would be a device that could take a 10bit parallel interface that is 8b/10b encoded, which is standard in GbE, and convert it into a 4 lane GbE serial link to be read into the SLK2511. It is not impossible it would…
HI Jim,
Is your application going to implementing Base-T signaling or Base - X? The TLK2208 is intended handle the BASE-X interface type, which is used to transmit NRZ signals over optical fiber, balanced copper twinaxial/coaxial cabling, or copper…
