Part Number: TMDS570LS31HDK Other Parts Discussed in Thread: TMS5703137 Hello,
Could you provide the pinout/signals for J12 (19x2, mictor) DMM functionality? I'm wanting to know if and where the TMS5703137's pin J16 (DMM_SYNC) is routed.
Part Number: TMS570LS3137-EP Other Parts Discussed in Thread: TMDS570LS31HDK , HALCOGEN
Hi TI Team,
What are steps to follow to implement LWIP MII & RMII ON TMDS570LS31HDK DEVELOPMENT BOARD.
Thanks and Regards,
AK
Part Number: TMDS570LS31HDK Other Parts Discussed in Thread: TMS570LS3137 Hi TI Team,
I had worked on a TMDS570LS31HDK Board. Suddenly the DS4(3.3V) and DS3(1.2V) LED is not working. IN C168 capacitor did not get the value of 3.3V and in capacitor C150…
Hi Robin,
Apologies for the delay.
Robin S said: Does that mean that the syndrome is only calculated on OTP & FEE?
Yes, you are right about flash writing. But at the time of reading or speculative fetches by CPU also the syndrome will be calculated…
Part Number: TMDS570LS31HDK Other Parts Discussed in Thread: HALCOGEN Hi,
In the related question someone had asked if there was a specific reason for the time delay in the STC test setup generated by HALCOGEN.
I need to configure the test to use 24 cycles…
Part Number: TMDS570LS31HDK Hi there,
I was wondering if there was a way to completely disable all interrupts on the Hercules, including FIQ. Per spna218 Section 2.5, FIQ cannot be disabled once enabled. However, we need to have a severe error handler that…
Found the issue independently. We were having the prefetch abort trigger the abort due to ECC flash holes. After generating ECC for the holes we no longer see the issue.
Hi Robin,
I guess i found the issue:
Robin S said: However, when I run the SafeTI command slRet = SL_SelfTest_LIN(LIN_ANALOG_LOOPBACK_TEST, SL_LIN1); or the SCI equivalent it still hangs.
Why you are running " SL_SelfTest_LIN" function to perfo…