Other Parts Discussed in Thread: DRV8312 , DRV8301 As reported in another post by a user, the F28027F controlCARD was not functioning correctly with the DRV8312 kit for InstaSPIN-FOC projects.
While the drv files in sw\drivers\drv\boards\drv8312kit_revD…
Other Parts Discussed in Thread: MOTORWARE , UNIFLASH , CCSTUDIO , TMS320F28027 , DRV8312 , TMDSCNCD28027F Hi,
I wish to evaluate InstaSPIN with Piccolo MCU, I was given the following setup: Windows 7 Pro x64, CCS 5.4.0, XDS100v2 , Piccolo 28027 controlCARD , DRV8312EVM…
TMDSHVMTRINSPIN supports the following control cards:
TMDSCNCD28027F InstaSPIN-FOC Enabled
TMDSCNCD28069MISO InstaSPIN-FOC and InstaSPIN-MOTION enabled
TMDSCNCD28054MISO not included, but supported by this kit and MotorWare software projects
TMDSCNCD280…
Part Number: TMDSHVMTRINSPIN Other Parts Discussed in Thread: TMDSCNCD28027F , , CONTROLSUITE , MOTORWARE Dear Sirs:
we procured TMDSHVMTRINSPIN development kit ,and TMDSCNCD28027F for chip motor controller. Do you have controlsuite sample program used FOC…
Hi sir,
Thanks for the reply.
M3 and M6: We have 15V adapter plugged at M6 and a USB cable at M3 (from Laptop). LED is glowing.
CCS settings: We have attached document (dev kits) in Image1, are they correct?
Jumper / Switch settings:
TMDSHVMTRINSPIN…
Hi sir,thanks for the reply present we don't have drivers problem,we are using TMDSCNCD28027F control card it didn't have usb slot,so we need to use on chip emulator only,but we don't know the switches and aslo new project settings in ccs (software…
Part Number: TMDSHVMTRINSPIN Other Parts Discussed in Thread: MOTORWARE
Tool/software: Code Composer Studio
Hello team
we are using TMDSHVMTRINSPIN development kit along with TMDSCNCD28027F control card, when we are going to load the example projects present…
Part Number: TMDSHVMTRINSPIN Team,
I have two questions:
Will the TMDSHVMTRINSPIN kit support driving a motor at 80K rpm with FOC? If the kit does not support this will one of the supported devices ( TMDSCNCD28027F , TMDSCNCD28069MISO , TMDSCNCD28054MISO or…
Sunil,
what EVM are you using? TMDSCNCD28027F?
If so, you need to configure SW1.
There is a good guide of how to port a RAM code to FLASH in the one-day Workshop. http://processors.wiki.ti.com/index.php/C2000_Archived_Workshops#F28027_Workshops
Regards…
Part Number: DRV8301-69M-KIT Other Parts Discussed in Thread: TMDSCNCD28027F , TMDSCNCD28069MISO , DRV8301 , BOOSTXL-DRV8301 , BOOSTXL-DRV8305EVM ,
Hey guys,
Can I use either TMDSCNCD28027F or TMDSCNCD28069MISO controller on DRV8301-HC-C2-KIT to have the InstaSpin…