Part Number: TMDSCNCD280039C Hi,
I received the evaluation boards listed above and I am trying to open a project and connect with the Control Card in the Docking Station, but I am getting the following error message:
I checked for updated and none were…
Part Number: TMDSCNCD263
Hi,
I am trying to map pins from the evaluation board to the docking station by referring the schematic provided at TMDSCNCD263 Evaluation board , https://www.ti.com/lit/zip/sprcak1 (revision e2).
The doc says user led is on gpio_20…
Part Number: TMDSHSECDOCK Hello Team,
I'm posting on behalf of my customer:
I have started having error connection issues with one of the F2837x control cards that I have. Since I have several control cards (all are the same) and there is this issue…
Part Number: TMS320F280039C Other Parts Discussed in Thread: TMDSHSECDOCK , SYSCONFIG , C2000WARE Hello ,
I have TMS320F280039C control card and the TMDSHSECDOCK docking station. I ran a LED blinking model from simulink to blink the D1 and D2 leds in the…
Part Number: TMDSHSECDOCK Other Parts Discussed in Thread: TMDSCNCDH52C1 , C2000WARE , CONTROLSUITE Hi Team,
Our customer is trying to use the J2 14-pin JTAG connector on the TMDSHSECDOCK docking station to access the TMDSCNCDH52C1 controlCARD. However, the…
Part Number: TMDSHSECDOCK Other Parts Discussed in Thread: C2000WARE , , TMDSCNCD263 Hi Team,
i am using AM263x control card with TMDSHEDOCK docking card ( Revision F). i am trying to findout the correct version of Data Sheet for the control card REV F…
Part Number: TMDSHSECDOCK Other Parts Discussed in Thread: TMDSECATCNCD379D , TMDSCNCD28379D , C2000WARE
Hi,
I am using TMDSECATCNCD379D development kit in my project. I also use TMDSHSECDOCK to access the GPIOs on this kit. But I can't get a signal or…
Part Number: TMDSHSECDOCK Other Parts Discussed in Thread: TMS320F28388D , C2000WARE , TMDSCNCD28388D , DP83640 Hi,
I am little confused with connection between TMS320F28388D and control card. I am trying to use MII interface to connect a external PHY.
Here…
Part Number: AM2634-Q1 Other Parts Discussed in Thread: TMDSCNCD263 , TMDSHSECDOCK , AM2634 I am using this TMDSCNCD263 board and this is the IO Extender TMDSHSECDOCK. When I work on the AM2634 board, it functions correctly for some time, but after a while…
Harshit,
The expectation is that you use the CLB tool and function calls to program the CLB. I believe that other methods are not supported.
I will close this post now, you can reopen it any time if you have additional questions or something new comes…