Part Number: TMDXIDK5718 Other Parts Discussed in Thread: ISO1641 Hello!
We are using TI-RTOS to communicate over I2C. We are using I2C1 to communicated with an ADC through an ISO1641 isolator. We are observing a condition where the I2C driver enters…
Part Number: TMDXIDK5718 I am currently using TFTP boot. To the image I started with, which was built with TI SDK (yocto built), I added a few packages (e.g. pyscard) directly on the target by building them on the target using source codes (I found the…
Part Number: TMDXIDK5718 Hello,
I'm encountering an error where if I attempt to attach with a XDS110 Debugger I see the following Error Output below. This issue primarily occurs if the Processor has already been flashed with a QSPI Image that it is booting…
Part Number: TMDXIDK5718 I am running tisdk-base-image on TMDXIDK5718. Can you please describe a procedure that enables all six ethernet ports available onboard. No matter what i try to enable them, only one that actually works is etho - and that is by…
Part Number: TMDXIDK5718
Hello,
Hello, I am trying to install the most updated version of docker on my TMDXIDK5718, currently the version that is installed is the following: DOCKER_VERSION = "19.03.8-ce", how can I update the version?
Part Number: TMDXIDK5718 I'm going through the procedure described in
1.2. Building the SDK.
It mentions Cross-Compile Toolchain requirement and describes the following:
Download the toolchain compilers from the links provided in the SDK release page…
Part Number: TMDXIDK5718 I have questions regarding Quick Start process for Building the SDK.
Host is Ubuntu 22.04.3 LTS,
Per the instructions given in Quick Start, executing the apt-get step produced the following error:
peterh@peterh-Surface-Laptop…
Part Number: TMDXIDK5718 Hi.
I created and have been using the default linux bootable image provided in the SDK. It comes with Python 3. In order to continue evaluation, I need to get additional packages (i.e. sudo apt install). It appears, however, The…
Part Number: TMDXIDK5718
I downloaded "ti-processor-sdk-linux-am57xx-evm-06.03.00.106-Linux-x86-Install.bin" to set up TMDXIDK5718. The setup process went successfully, except for board setup part. The board was detected correctly on /dev/ttyUSB1…