Peter,
1. Can all three of these devices perform equivalently when running Instaspin-FOC, or can only the F28004XC version run insta-spin
A1)No, only devices with the "C" suffix support the InstaSPIN-FOC SW libraries. So F280041CRSH is the correctly…
Mark,
As Ki mentioned there is a device calibration function that is automatically called from the GEL script. This is part of the Boot ROM, but during a debug session the Boot ROM is typically bypassed so that is why the GEL is automatically loading…
Johnson Alanl said: I can understand what you said, and I also understand that the equations, logic, interconnect does not need to be changed, but I would like to ask whether the size of the parameter value does not need to be changed?Like here in green…
Part Number: TMS320F280049 Hello Champs !
I have a problem about PWM Synchronization that needs your help .
I used the chain PWM4->PWM5 .
I configured PWM4 as master and PWM5 as a slave. PWM5 is syncronized with EPWMxSYNCIN .
Both PWM4 and PWM5…
Brandon,
Please reference this forum post and perform similar updates to your application for the different device: https://e2e.ti.com/support/microcontrollers/c2000/f/171/p/385578/1360423#1360423
Here is a document you can also reference that works…
Hello,
Conor said: 1) Is it okay if the yellow pins are open when JTAG is not connected?
TMS, TDI, TDO, and TCK can remain open. TRST should still have a pull down resistor (~2.2k ohms).
Conor said: 2) Is the following how to handle unused pins…
Hi Sheldon,
We have such example for F28004x but not for F2837xD
Refer : https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/796313?TMS320F280049-how-to-better-use-the-two-flash-banks-
Thanks, Katta
Hi Manoj, In the example provided by you in a different thread e2e.ti.com/.../3909865
Manoj Santha Mohan said: Arpan,
In I2C master receiver configuration in repeat mode, you should be knowing when you are receiving the last byte. Before you receive…
Hi '0721,
(1)
This will depend on what size package you have. Smaller pincount packages have the PGA input double-bonded with a bare ADC input. You can see the specific connections in the datasheet or TRM in the "Analog Pins and Internal Connections…
Part Number: TMS320F280049C Other Parts Discussed in Thread: TMS320F28377D , , TMS320F280049 Hello,
Some info on our design first:
We have connected a SPI peripheral of the TMS320F280049C to a McBSP peripheral of the TMS320F28377D used in clock…
