Part Number: TPA1517 Hi Sir
Just have a question about the TPA1517 fixed gain.
We tested with two types of audio codecs(one is ALC262 and the other is HS-100B)running 1Khz sound wave but the speaker amplifier is the same one TPA1517 driving a 4ohm speaker…
Part Number: TPA1517
Hi,
Could you please tell me how to use TPA1517 with the mono configuration in the single-ended mode? Is my understanding correct that the capacitor should be added between the unused IN1 input and GND and the unused OUT1 output can…
Part Number: TPA1517 Hi, I have a design featuring the TPA1517 audio output amplifier, when no audio is being played we mute the speaker by applying 6V to the M/SB pin (12V during normal operation). When switching between normal operation and mute mode…
How do you explain the TPA1517 development board being worse than ours. I didn't find any app note relating to power supply noise sensibility. where can i find it? It is also surprising to me that different types of power supplies and vendors cause the…
Part Number: TPA1517 Hi Team,
Our customer met burr issue with TPA1517. Please refer to the schematic and waveform below.
Could you please give some comments on what the issue cause might be? Does TPA1517 M/SB pin have timing requirement? Like how long…
Part Number: TPA1517 Dear Team,
May I know what is the spec for TPA1517 output capacitor (COR)? What is the minimum capacitance and withstand voltage for the capacitor? Is it possible to use capacitor with smaller capacitance and withstand voltage? Thanks…
Part Number: TPA1517 Hello
Could COR/COL change to small cap value and voltage raining from 470uF? What is voltage rating of 470uF? Thank you
BR
Patrick
Hi Ram,
TPA1517 is in single-ended output mode. With 14.5V power supply and 8Ohm load, the maximum output power is around 3.3W without clipping. To achieve 6W output power on 8Ohm, need higher than 20V power supply. So I don't think TPA1517 can support…