Part Number: TPD2S300 Other Parts Discussed in Thread: TPS25810 , TPS65988 , TPS25820 Hello - Attached is block diagram for a USB-C power architecture we are looking to solve. Here are the configurations that may exist implementing USB-C power:
Charger…
Part Number: TPD2S300 Hi TI team,
Would you provide TPD2S300YFF-EVM original file for us to make a PCB? We want to test it before kick off project.
Many thanks.
Hello,
1. The TPD2S300 will protect the CC pins from a Short-to-Vbus event. If there is a Short-to-Vbus event on either one of the CC pins, the OVP FETs open and the FLT pin is asserted. The connector side voltage clamps, OVP FETs with extremely fast…
Part Number: TPD2S300 Hi all,
My customer is designing TPD2S300 in their power adaptor product for 20V 5A application. Can they connect VM pin to Vbus for >8V power? Or any other suggestion for them? Thanks for your kindly help.
Best regards,
…
Part Number: TPD2S300 I am considering the use of the TPS2S300 into a different application for which it is originally intended. My customer has a single UART line (115kbps, 3.3V) that could potentially be shorted to a 22V line. I thought about using…
Part Number: TPD2S300 Other Parts Discussed in Thread: TPD2S703-Q1 , TPD6S300 We have a TPD2S300 in our design and it has a footprint pitch of 0.4. However our PCB manufacturer and assembler have told us they are going have trouble with the solder Mask…
Part Number: TPD2S300
Hi,
My customer has the following questions:
It looks like the GND pin is buried in the center ball of the package. Thus, it cannot be routed out using conventional "drill" vias on a PCB. Their concern is only micro laser vias…
Part Number: TPD2S300 Dear Aramis P. Alvarez,
In the following thread :-
http://e2e.ti.com/support/interface/circuit-protection/f/389/p/653781/2401161#pi320098=1
In the response : Jan 10, 2018 4:33 PM
You stated :-
"If the total capacitance…
