Part Number: TPS24750 Other Parts Discussed in Thread: TPS25982 Hi,
I want to connect the component TPS24750 to a load who needs 15 amps, this component knows to give a maximum of 12 amps, can I connect two components in parallel?
Part Number: TPS24750 Hello,
I am using TPS24750 on a 8V-1A application. During powering up the input of the Efuse (while keeping Efuse enable pin low) the fault output of the Efuse goes low for 2 microseconds before being released again. This occurs…
Part Number: TPS24750 Other Parts Discussed in Thread: TPS25982 Hi Team,
Would you advise does TPS24750RUVT have recognition of IEC62368-1 even though
there is a UL 2367 Recognized only in datasheet?
My customer need this information.
Thanks
Best regards…
Part Number: TPS24750 Hi team,
Can you please help with the below query:
we are using TPS24750 hot swap for powering QSFP modules.
Per design resistor values and datasheet formulas, Ilim = 10.9A and Plim = 23W .
Operation is stable till 9.4A on 3.3V…
Part Number: TPS24750 Hi Team, I would like to get your input on the customer request below: What is the absolute maximum current pulse rating of the internal MOSFET to be within the Safe Operating Area curve of TPS24750? The customer has a 12V application…
Part Number: TPS24750 Other Parts Discussed in Thread: TPS25982 Hi
I want to monitor the current through the Rsense by monitoring the voltage of the IMON.
As the picture above show, I add an amplifier, and the IMON pin connects the "IN+" of TLV9001,…
Part Number: TPS24750 Hi Team,
Would you advise below three questions about IMON?
(Question) 1. Are you assuming an application in which an AD converter is externally connected to the IMON pin of the TPS24750 to detect the current value of the SENSE resistor…
Part Number: TPS24750 Hi All,
There is the -0.3V absolute maximum limit at the output pin of TPS24750, and in the datasheet there are suggestions to clamp the output with a schottky in case of an inductive load or cable inductance. I suspect that this…