Part Number: TPS26630-33EVM I am having some trouble getting the TPS26631 to perform as expected. I am using the device as input protection for a device and have the following requirements: reverse polarity preotection, uvlo (9V), ovlo (30V), overcurrent…
Part Number: TPS26630-33EVM Hi support team,
It seems that current is leaking to the output when the output current is limited.
J5: Open, J4: 9-10 short (0.6A), VIN_SYS1=24V (adapter capacity 3A), electronic load (3A) on output
The leaking current is…
Part Number: TPS26630-33EVM Other Parts Discussed in Thread: TPS2663 , LM5176
Hi team,
customer want to know what's the mechanism of OVP and OCP in below design, how can it handle dynamic Vout in PD3.1 (28,36,48V) ?
would you elaborate it for me, …
Part Number: TPS26630-33EVM Hi support team,
Please let me know the purpose of D4 and D9.
1. I think that current will flow for a moment when the power supply is connected in reverse. Is it to prevent current from flowing in the load circuit?
or
2. Is…
Part Number: TPS26630-33EVM Other Parts Discussed in Thread: TPS2663-166EVM Hi there,
are the schematic/layout files for the boards TPS2663-166EVM and TPS26630-33EVM available?
Kind regards,
Laura
Part Number: TPS2663 Hi expert,
I noticed that TPS26633 will automatically go into the voltage clamp situation when OVP is trigged. And the duration for the voltage clamp is 162ms.
My question is if the fault is removed in the duration, could TPS2663…
Part Number: TPS26630-33EVM Other Parts Discussed in Thread: LM5069
Hi,
I did some tests on TPS26630-33EVM board. I'm using DC load and battery. EVM is not latching-off like overcurrent fault while undervoltage stage. When I disconnect the load, voltage…
Part Number: TPS26630-33EVM Other Parts Discussed in Thread: TPS2663 , TPS2662 , TPS2660 Hello Expert,
Our customer want to test IEC610000-4-5 Level 3 w/ this EVM and it is their spec.
Vin is both adaptor 12V or PoE 48V.
Could you give us what's the additional…