Part Number: TPS26750 Tool/software: Hi,
We are planning to use TPS26750 USB PD in our 240W sink application. We need few clarification regarding the part,
1. In sink application, whether is it required to connect PP5V pin to 5V or it can be connected…
Part Number: TPS26750 Other Parts Discussed in Thread: TPD4S480
Tool/software:
I am working with a custom design, sink only, and VBUS powered, that has a TPS26750 connected to a MCU via I2Ct, I am using a TPD4S480 as a protection chip in the configuration…
Part Number: TPS26750 Tool/software: We will use USB PD as an adjustable power supply, up to 240W, i.e. sink only.
Basically this is what we want to do.
1. Read source capability, store in MCU
2. MCU will continuously request voltage and current…
Part Number: TPS26750 Tool/software: We are working on solution for USB PD EPR dual role 48V/5A. Is it TPS26750 support Fast Role Swap in both directional (Sink FRS and Source FRS)?
Part Number: TPS26750 Other Parts Discussed in Thread: BQ25756 Tool/software: Hi all,
I’m evaluating the TPS26750 + BQ25756 for a USB-C PD 3.1 source-only application to provide the full 240W (48V/5A) to a sink device. However, when using the online…
Part Number: TPS26750 Tool/software: Hi,
After many attempts to config the EVM to request 24V from 15-28V AVS with Application Customization Tool, it proved to be unsuccessful.
Can you please share a json file that is proven to be able to request…
Part Number: TPS26750 Other Parts Discussed in Thread: BQ25756 , Tool/software: When is POWER_PATH_EN asserted or not asserted? I might be overlooking it but I can't seem to tell from the datasheet.
I'm assuming it is asserted according to the Dead…
Part Number: TPS26750 Tool/software: Hi, I'm trying to design a USB C PD 3.1 delivery/power supply . ( Dual or Single ) SPR
I'm just going to use it as a power supply without any firmware or software. I don't know much about USB C PD charging circuits…
Part Number: TPS26750 Other Parts Discussed in Thread: BQ25756 , BQ25758 , BQ25756EVM , Tool/software: Designing a 240W PPS/AVS source only.
I will use a fixed PS as input, no battery.
I do not want a MCU involved, I need a PD controller that controls…
Part Number: TPS26750 Tool/software: Trying to load patch bundle from MCU (ESP32-S2) over I2C (400kHz), according to docs, but for some reason I get !CMD. I have tried loops with different delays, but nothing seem to work even if all commands are correct…
