Part Number: DRV8912-Q1 If the answer is more than two, like 3. How to control 3 DRV8912-Q1 by one SPI. Besides, does this motor drive pass ISO7637 standard?
Part Number: AM2634-Q1 Hi,
We’ve received a question about “EXT_REFCLK” from my customer. Could you confirm below ?
“EXT_REFCLK” is described as “up to 50MHz” in the Figure 6-18.Root Clocks in the TRM, but it is 100MHz in other descriptions…
Part Number: DRV8714-Q1 Other Parts Discussed in Thread: DRV8706-Q1 , DRV8705-Q1 , DRV8718-Q1
DRV8705-Q1, DRV8706-Q1, DRV8714-Q1, DRV8718-Q1
Above automotive gate driver family has offline diagnostic function. Procedure of offline diagnostic is shown in…
Part Number: LM63625-Q1 Hi team,
The application note describes the following things related to copper area which is 18 times the area of component package.
- P.11 : A heat generating component will have a "thermal footprint" that is about 18 times the…
Part Number: TLV431A-Q1 Other Parts Discussed in Thread: TLV431A Hi there,
Figure 18 in the TLV431A-Q1 datasheet is missing some cap labeling info on the X axis. I'm sure this is the same as the TLV431A (non Auto) but wanted to reach out to be 100% sure…
Part Number: PCM6260-Q1 hi team,
now customer set up the PCM6260-q1, but First slot of TDM exception from PCM6260 output.
test condition:
VBIAS: 8 V
D3V3_2: 3.36 V
VBAT_FILTER: 12 V
The start timing is as follows: 1 Power up 2.DSP provides BCLK and SYNC to…
Part Number: LM25180-Q1 Other Parts Discussed in Thread: LM25180 Hi expert,
My customer is using LM25180 to design 3-ch isolated power supply.
Input voltage is 12V, output voltage is 15V. The inductor of transformer is 25uH, the turn ration is 12:18:18…
Part Number: TPS3307-18 Hi, all.
Td of tps3307 is prescribed with Min140~Max280 ms by the 25 degree.
How many is Td when using the full temperature range?
Do you have a temperature dependency chart of Td?
Best Regards,
Kobayashi
Hi,
Doredla Sudheer Kumar said: who ever is the sender of traffic need to have TSN configuration to handle the traffic in priority.
I still have some questions about CBS. Here is a description of my test environment. The eth2 of the sender TDA4vh is connected…