Part Number: TPS53317A Tool/software: ATTENTION: This is the ONLY attempt by IBM to secure information regarding the use of the newly added SVHC(s) in deliverables supplied by your company to IBM. If no response is received, IBM interprets your silence…
Part Number: TPS53317A Tool/software: The TPS53317A on a new board design no longer has a voltage output after initially working.
I have a brand new board design which uses the TPS53317A to supply 0.72V to an FPGA. Vin is 1.2V. Upon power up of the…
Part Number: TPS53317A
Hi:
Why we should place a 10 ohm resistor with a 0.1 uF capcitor from the output to the VOUT Pin? Can I change the RC value to 1 ohm and 0.01 uF?
Thanks!
Jiajun
Part Number: TPS53317A Hi team,
My customer is using the TPS53317A now.( non-tracking mode). The start up waveform is as below which is not monotonous. Do we have some suggestions to improve it? i have suggested the customer to add more output cap 2…
Part Number: TPS53317A Hi team,
The operating temperature range of TPS53317A shown on the webpage is -40~125℃, but in the datasheet is -40~85℃，which is the ture operating temperature range?
Part Number: TPS53317A
Hi All,
May I know what is the frequency tolerance under 1.2V input, 0.6V output, 2.7A Iout, and 600kHz setting?
It hard to judge based on the below figure from the datasheet.
The customer request +/-10% means 540KHz…
Part Number: TPS53317 Hi Team,
Do you know what's the difference between TPS53317 and TPS53317A? I check both D/S, which is almost same except Vout_min.
Best,
Stanley
Part Number: TPS53317A Other Parts Discussed in Thread: TPS53317 Because over current limit only show typical value in TPS53317A and TPS53317 datasheet .
Can you help share how many max and min value for TPS53317 adn TPS53317A ?
