Part Number: TPS552872 Tool/software: Dear sir/mam
Currently, we are experiencing an issue with the TPS552872 buck-boost driver.
Scenario 1: When the input battery voltage is greater than 4.1V, it boosts to 5V properly with a load of 2A.
Scenario…
Part Number: TPS552872 Tool/software: Hello TI;
I'm using the TPS552872 in a buck/boost application. It's set up for FPFM, 400kHz, 12V out, 4.7uH 8A Inductor and 4A max load. When operating in buck mode (input 24V), Vout drops ~8V when a 500mA load…
Part Number: TPS552872 Tool/software: Hello Folks,
Could you review my design for a 5V power supply?
Input Voltage: 4.5V - 22V
Nominal Input Voltage: 12V
Output Voltage: 5V
Output Current: 1.5A
Ambient: 60C
Input Ceramic Caps: Qty 3 of Samsung…
Part Number: TPS552872-Q1 Other Parts Discussed in Thread: TPS552872 Tool/software: Hi All,
Please provide Stability plots for the below Part in the given conditions.
1.Buck-Boost converter, TPS552872 For the following conditions, Cout= 189uF Cin…
Part Number: TPS552872-Q1 Tool/software: Are there any slew rate requirements on the power supply input or enable inputs? is there a concern that a fast slew rate can falsely trigger the ESD circuitry and cause the IC to miss-behave
Part Number: TPS552872 Tool/software: Dear team,
The customer would like to use TPS552872 for their application.
- Input 4.5V ~ 32V
- output :7V/1A
- FPWM mode
The customer want to set FPWM mode but there is no external power rail to input logic…
Part Number: TPS552872 Tool/software: Hi team,
TPS552872
One of my projects the input voltage range between 4V to 20V, and my load required is 5V/2A DC (full load condition), is this(TPS552872) IC can use it in my design while the input voltage in…
Part Number: TPS552872 Tool/software: I've built a prototype board which has TPS552872RYQR set up for 3V output voltage. Functionally the design works as intended in my application, but I noticed a curious mismatch of observed leakage current into VOUT…
